- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
Wi-Fi (802.11 a/b/g) to Serial Port Converter
Previous | 3 / 3 | Next |
Description
AN-WF-RS-232/422/485 is WiFi wireless access based serial RS-232/422/485 to IP converter / wifi serial networking device.
Wifi serial device networking (TCP/IP) has become a trend of industrial on-site networking. However, the on-site wiring construction and alternation cost have always been a bottle neck of serial device networking. With the growingly mature WLAN technology and falling cost of related hardware, the advantage of serial device networking has become quite obvious, which makes serial device wireless networking a must.
AN-WF-RS-232/422/485 wireless serial port server offers wireless transceiver and high speed serial port, conforming to IEEE802.11b wireless network communication standard. The maximum standard transmission distance is 300M and further wireless communication can be achieved by additional high gain external antenna, which can not only prevent difficult wiring but also lower construction cost, specially suitable for devices like industrial environment and factory automation system, on-site monitoring system, etc.
The RS232 connection application has been used for a long time. RS232 cable has limitations in distance. WLAN (Wireless Local Area Network) has become a worldwide standard protocol for wireless applications. There are many applications for using RS232 connection over WLAN, including POS, data capture, telemetry, PLC controllers, remote control, vending machine, industrial control, and others. The device that supports connection over WLAN is called as Wireless to Serial Server.
To make your management task easier, the AN-WF-RS-232/422/485 provides additional features, such as password authentication, IP filter, WEP support for 64-bit and 128-bit encryption, and SNMP support.
Features
- Connect wifi serial device to Wireless LAN network
- 802.11b Wireless LAN, compatible with 802.11g
- WEP support for 64-bit and 128-bit encryption
- Password authentication and IP filter
- Ad-Hoc(peer-to-peer), Infrastructure, Pseudo IBSS mode support
- RS-232 Serial Port for console
- 3 in one RS-232/422/485 port can be freely chosen, at up to 57.6 Kbps
- Versatile socket operation modes, including: TCP/IP, UDP/IP, HTTP, ARP, DHCP client
- Easy-to-use Windows Utility for mass installation
- Supports Windows Virtual COM drivers
- LEDs indicate LINK, DIS, ACT and PWR.
Specifications
Environmental:
- Temperature: Operating: 0 to +55 °C / +32 to
- Storage: -20 to +65 °C / -4 to +149 °F
- Relative Humidity: 95% (non-condensing)
Serial Interface
- Interface£ºRS-232/422/485 (software selectable)
- No. of Ports£º1
- Port Type Signals£ºMale DB9
- RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422: Tx+, Tx-, Rx+, Rx-, GND
- RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND
- Interface: RS-232/422/485
- Port Type:DB9 Male and six bit terminal
- Baud Rate Options: 9600, 38400, 57600 bps
- Data Length Options: 8 bits
- Parity options: None
- Stop Bits Options: 1 bit
- Flow Control: Hardware or none
- Serial UART Buffer: 256 bytes input, 256 bytes output
LAN
- 10/100 Mbps, RJ45, Auto MDI/MDIX
WLAN
- Spread Spectrum Technology: DSSS (Direct Sequence Spread Spectrum)
- RF Range: 2.4 ~ 2.4835 GHz
- Data Rate: 11 / 5.5 / 2 / 1 Mbps
- Modulation: DBPSK for 1 Mbps, DQPSK for 2 Mbps, CCK for 5.5 / 11 Mbps
- Operation channels: US – 11, Europe – 13, France – 4, Spain – 2, Japan – 14
- RF Power Output (Typ.): +15 dBmReceive Sensitivity (Typ. @BER 10E-5): -83dBm@11Mbps
Emissions EMC Certificate:
- U.S.A.: FCC Part 15 Subpart C
- CE: ETSI EN 300 328, EN 301 489-1/17, EN 55022, EN 61000, EN 50371
- Certification: Some models are already FCC Modular-Certified for immediate


Ordering Information
AN-WF-RS-232/422/485
WiFi (802.11b) wireless access based serial RS-232/422/485 to IP converter / serial networking device, 110-220 VAC. or DC power options