- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com10G OEO XFP 每 XFP Media Converter(1R Repeater)
Previous | 11 / 12 | Next |
XFP-XFP converters can be used as well as standalone converters (like you can see them on chassis in this video), or as plugin in cards in AN-CH10 chassis as well.
Description
AN-M10-10G-XX-M is XFP-XFP OEO type media converter / repeater for connection between fiber to fiber 10Gbps equipment function as fiber mode converter ,or as fiber repeater for long distance transmission. It is available as standalone unit with separate external power supply, or as plug in card inAN-CH10 chassis.
It’s main applications are such as connection between fiber to fiber or fiber to copper 10Gbps equipment function as fiber mode converter ,or as fiber repeater for long distance transmission or OEO for network backbone(SAN, LAN, MAN).
It support SDH/SONET STM-64/OC-192ㄛ10G fiber channelㄛ10G Ethernet etc and can be applied in Telecommunication room, R&D laboratory, Data center or even 1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.
Features
-
1R Repeater
-
Support Jumbo Frame
-
Transparent Transport and very low delay
-
Support ITUT prescribed DWDM/CWDM wavelength
-
Support hot plugging
-
Support 2U Rack (16 channel) and standalone use
-
Full State Led display
-
Easy installation
Specifications
Performance Data
|
Technical Indexes
|
Equipment function
|
1R Repeater
|
Transmission Speed
|
9.95Gb/s-11.35Gb/s
|
Protocols
|
SONET OC-192, SDH STM-64 (9.95Gbps)
10G WAN (10Gbps)
10G LAN (10.31Gbps)
OTN OTU-2 (G.709) (10.70Gbps)
10G LAN with 255/237 FEC coding (11.09Gbps)
10G Fiber Channel (11.32Gbps)
10G POS
|
Interface Type
|
XFP to XFP
|
Transmission Distance
|
XFP module: Up to 80Km
|
Maximum Packet Forwarding Rate
|
14,880,950/S
|
power requirement
|
Rack-mountable : AC 85 ‵ 220V OR DC -48V
Standalone: AC 110~220V OR -48V
Power consumption: ≤4W
|
Work Environment
|
Operating Temp: 0~ 50 ⊥
Storage Temp: -10~ 70 ⊥
Humidity: 5%~90% ㄗ non-condensing ㄘ
|
Dimension
|
Card ㄩ 11.5mm ㄗ W ㄘ × 78mm ㄗ D ㄘ
Standalone ㄩ 156mm ㄗ W ㄘ × 128mm ㄗ D ㄘ × 32mm ㄗ H ㄘ
|
Ordering Information
AN-M10-10G-XX-M
|
10G Standalone managed OEO(Optical-Electrical-Optical Converter (1R Repeater)) XFP-XFP port(without Module) media converter
|