- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.comAN-L3-3526F 24 Port modular Layer 3 Routing Switch
Previous | 5 / 7 | Next |
Description
The AN-L3-3526F is a layer 3 routing switch that offers modular configuration. There are 6 modules that can be installed into the main frame. Each module includes 4 ports, either copper or fiber ports. So the AN-L3-3526F can be configured as whatever you might like to. E.g, configure it as a 24 port 10/100Base-Tx, or configure it as a 24 port pure fiber switch. Or to configure in a fiber and copper mixed version, e.g, a 12 port 10/100Base-Tx + 12 port 10/100Base-Fx fiber and copper switch.
The AN-L3-3526Fis a secure and intelligent Layer 3 switch featuring wire-speed switching.It adopts an industry grade case design, and it’s a layer 2/3 wire speed enterprise central routing switch with 10/100M aggregation for Carrier data centers, server farms, wiring closets and metropolitan area networks.
Its hardware is designed to support intelligent Layer 2/3/4 flow classification. The main features of the 24 port layer 3 routing switch, such as access control list (ACL), filtering and QoS classification bring intelligence and security to the edge of the networks and enable applications such as real-time streaming multimedia.
It supports a wide range of Layer 2/3/4 protocols including RIPv1/v2, OSPFv2 and PIM-SM, VRRP. It’s regarded as the foremost intellectual access point of area network,not only have switching and routing functions but also includes authenticating function (e.g. user access control), secure protection (e.g. defends the virus and scanning) function, monitoring function etc. It is an ideal choice of solving a great deal of awkward problems.
Features
-
15.2 Gbps switching capacity.
-
All ports support wire speed forwarding.
-
15.2 Gbps switching capacity.
-
6.6 Mpps Layer 2/3 wire-speed forwarding.
-
Support for flexible queue scheduling algorithms, i.e. Strict Priority (SP), Weighted Round Robin (WRR), and SP+WRR; 8 priority queues.
-
Support for intelligent Layer 2-7 flow classification.
-
Support for IEEE 802.1p, TOS,and DiffServ Code Point.
-
Compliance with IEEE 802.1x and Web portal, the STCS3526F can identify users who attempt to access the network.
-
It can also prevent unauthorized access to the network by binding any combination of MAC,IP,VLAN and PORT.
-
Intelligent anti-virus policies and optimizing routing policy can guard the network to against the attack by Code Red and Worm Blaster,with which greatly improve the security of your network.
-
supports Simple Network Management Protocol (SNMP).
-
supports Command Line.
Specification
Feature Description
|
AN-L3-3526F
|
||
System
|
|||
Ports
|
24 ports 10/100Base-Tx or FX
|
||
Slots/Uplinks
|
2 Gigabit TX uplinks
|
||
Capacity
|
Backplane Bandwidth
|
15G
|
|
Switching Capacity
|
8.8Mpps
|
||
Packet Forwarding Rate
|
6.6 Mpps
|
||
MAC Table
|
8K
|
||
VLAN Table
|
255
|
||
Packet Buffer
|
sharing 32MB
|
||
Port-based ARL Limit
|
Port Learning Forbidden When The Limit Is Exceeded
|
Yes
|
|
ARP
|
4K
|
||
VLAN
|
Port-based VLAN
|
255
|
|
IEEE 802.1q VLAN
|
255
|
||
SuperVLAN & Sub-VLAN
|
Yes
|
||
Port Aggregation
|
Trunk
|
6 trunks, 8 ports in each trunk
|
|
Mirror
|
Yes
|
||
IGMP Snooping
|
Yes
|
||
IP/MAC/Port Binding
|
Arbitrary Binding of IP/MAC/Port
|
Yes
|
|
DHCP
|
Relay
|
Yes
|
|
Server
|
Yes
|
||
Rate Limiting
|
Port- or VLAN-based Rate Limiting
|
Yes
|
|
ACL
|
Up to 1K rules
|
||
IEEE 802.1p
|
Yes
|
||
Queue Management
|
WRR
|
Yes
|
|
SP
|
Yes
|
||
Hybrid (WRR+SP)
|
Yes
|
||
Routing Interface
|
VLAN Configurable with IP Address
|
32
|
|
DiffServ
|
Yes
|
||
Power Consumption
|
<30W
|
||
Routing
|
|||
Static Route
|
Yes
|
||
RIPv1/v2
|
Yes
|
||
OSPFv2
|
Yes
|
||
Policy-based Routing
|
Yes
|
||
PIM-SM
|
Yes
|
||
VRRP
|
Yes
|
||
Management
|
|||
Trace Route
|
Yes
|
||
SNMP
|
Yes
|
||
SNMP Trap
|
Yes
|
||
RMON
|
RMON-MIB
|
Yes
|
|
NMS
|
IP or IP Subnet-based Telnet Access Control
|
Yes
|
|
IP or IP Subnet-based SNMP Access Control
|
Yes
|
||
Hardware
|
|||
Power Supply( 90 – 264VAC 47- 63Hz,44 – 53VDC )
|
Yes
|
||
Dimensions (W*D*H)
|
443mm×360mm×44.5mm
|
||
Temperature
|
Operating temperature:0-50¡æ
|
||
Storage temperature:-40~70¡æ
|
|||
Humidity
|
10%-90% noncondensing
|
||
Power
|
AC 110- 240V
|
Ordering Information
AN-L3-3526F
|
24 Port modular Layer 3 Routing Switch.
|