- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
Framed E1 每 4 x Ethernet 10/100 BaseT Converter
Previous | 41 / 46 | Next |
4 Ethernet Port to E1 Converter - Framed & Unframed SupportE1 to 4 x Ethernet Port Converter with 4 Port Switch Testing
Description
AN-FE1-4ETH converter provides easy conversion from ITU-T G.703 E1 channel to 4 Ethernet interfaces.
Can be used widely in connecting between WAN and LAN, monitoring, etc.
The 4 x Ethernet interfaces is 10/100Mbps auto negotiation and can be full/half duplex. AN-FE1-4ETH can be used in applications where several Ethernet ports are necessary and additional switch or hub installation is not possible and where limited bandwith restrictions apply. The E1 is transparent and in full rate, which can support the E1 unframed mode, including fractional E1 per request.
A pair of AN-FE1-4ETH offer a cost effective solution for using existing E1 leased lines for transparent Ethernet service. Local management of the AN-FE1-4ETH Converter is provided via DIP switches. Front panel LEDs monitor the G.703 link, 4 x Ethernet LAN and serial ports for status and Loss of Sync. AN-FE1-4ETH compact G.703 Access Converter provides fractional E1/2.048 Mbps Network Termination as well as serial or Ethernet LAN interface conversion in a standalone or rack mount package. AN-FE1-4ETH terminates the G.703 Telco interface and converts the data for transmission to a user-oriented 10BaseT interface.
- Realize monitor of remote equipment from local equipment (Having two row of LEDs
- Upper row indicate local status, lower row indicate remote status, unframing equipment have no this function.
- Ethernet interface Half/Full duplex self adapt, supports VLAN.
- Ethernet interface support Auto-MDix.
- Provides 2 clocking types: E1 master clock, E1 line clock
- Provide 3 loop functions: local loop, to remote loop, order remote loop.
- Have pseudo random code test function, easy the installation and maintenance.
- E1 can support rate n*64k (n=1-32);
- Provide 2 impedances: 75 Ohm unbalance and 120 Ohm balance.
- Have Ethernet monitor self-reset function, equipment will not dead.
- Provide detecting realtime Ethernet communication status.
- Support 1-4 Ethernet switch function.
Specification
E1 interface parameters:
- Channel capacity: 1 Channels
- Interface Rate: n x 64Kbps to n x 32
- Bit Rate: 2.048 Mb/s ±50 ppm
- Line Code: HDB3
- Line Impedance: 120 Ohm / 75 Ohm
- Connector: RJ-45 or BNC
- Pulse Shape: ITU-T G.703; G.704
- Jitter Performance: ITU-T G.823
- Clocking: internal-clock, line-clock
Ethernet interface
- Interface Rate: 10/100Mbps
- 4 x 10/100BaseT interfaces
- Duplex: half and full duplex self-adapt.
- Interface charactertistics according IEEE802.3, IEEE802.1 Q(VLAN)
- Connector: RJ45, support auto-mdix
- MAC address capability: 4096
Power:
- DC: -48V (-36 to -72V); +24 V (Optional)
- AC: 90 to 260 VAC ; 47 ~ 63Hz
- Power Interface: DC power terminal/AC socket
- Power Consumption: 8 W maximum
Working environment:
- Operating temperature: 0 to 50°C
- Storage temperature: -20 to +70°C
- Relative humidity: 5% to 90% (25°C no condense)
Ordering Information
AN-FE1-4ETH /AC |
E1 - 4 x Ethernet interface convertor, 75/120 ohm impedance, 220V |
AN-FE1-4ETH /DC/48 |
E1 - 4 x Ethernet interface convertor, 75/120 ohm impedance, DC-48V |
AN-FE1-4ETH /DC/24 |
E1 - 4 x Ethernet interface convertor, 75/120 ohm impedance, DC+24V |
Additional Information
E1 ports | 1 |