- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
E1 G.703/G.704 Repeater up to 400m E1 Distance Extender
Previous | 7 / 46 | Next |
Description
The Repeater is E1 long-haul, OSI Layer One repeaters. The compact design, low cost, and easy operation and an excellent choice for E1 link extension. provides a simple 1 pair (Tx/Rx) in, 1 pair (Tx/Rx) out repeater interface, Setup is extremely simple. Just select the proper termination impedance from the three position slide switch (120 Ohm for E1) and The E1 signal is completely recovered with new pulse shape and low jitters.
Features
- Fully integrated transceivers for long-haul E1 interface;
- E1 Data and Clock recover;
- A variety of power options: AC220V, DC-48V / DC24V;
Specification
E1 interface
Interface Standard£ºcomply with protocol G.703;
Interface Rate£º2048Kbps±50ppm;
Interface Code£ºHDB3;
E1 Impedance£º75Ω (unbalance),120Ω(balance);
Jitter tolerance£ºIn accord with protocol G.742,G.823
Allowed Attenuation£º0~6dBm
Environmental indicators
Operating temperature£º-10 ¡æ – +60 ¡æ
Storage temperature£º-40 ¡æ – +85 ¡æ
Humidity£º0% -95% (non-condensing)
MTBF£º> 100,000 hours
Product Number | AN-E1-R |
Product Function Description | 1xE1(120 Ohm) Repeater |
Business Port Description | 2*E1 120 ohm Interface; |
Power Supply | AC220V or DC-48V (optional power supply), support for redundant power backup |
Product Size | (L × W × H) 140 * 110 * 31 mm Desktop |
Weight | 0.55Kg / PCS |
Bit Rate | 2048±50ppm |
Impedance | 120W Balance |
The “mark” (pulse) nominal peak voltage | 3.0V |
“Empty” (no pulse) nominal peak voltage | 0±0.3V |
Nominal pulse width | 244ns |
Pulse width at the midpoint of the positive and negative pulse amplitude ratio | 0.95¡«1.05 |
Nominal pulse amplitude, pulse width ratio of positive and negative half | 0.95¡«1.05 |
Ordering Information
AN-E1-R
E1 repeater, AC or DC power, or dual power