Description High-performance quad-core hardware platform, high speed  ●  Industrial design, high and low temperature resistance, durable ●  5G Dual Band Router supports NSA and SA networks, compatible with various operators ●  5G Dual Band Router support dual-band WiFi (2.4G and 5.8G) ●  Multi-antenna design to improve data transmission and reception capabilities   Features 5G Dual Band Router can be used in harsh and complex factory environments, directly connected to industrial equipment and equipment for IoT terminals for data collection, and through real-time massive data transmission, managers can easily grasp the production and operation situation at different times and regions.   High-performance quad-core hardware platform, high speed   Four-Faith 5G Dual Band Router make the data interaction between machines and platforms more efficient, and the characteristics of 5G ultra-high speed, large links, ultra-low latency, and secure transmission. Industrial design, high and low temperature resistance, durable   The design and manufacture of FOUR-FAITH 5G Dual Band Router all use high-performance industrial-grade 32-bit communication processors and industrial-grade wireless modules to ensure that the products can run stably for a long time in harsh environments without fear of challenges.   Rugged metal casing, high protection level, wide temperature and pressure, EMC level 4, can withstand harsh conditions such as extreme temperature, unstable voltage, high electromagnetic radiation, rain and dust, and ensure continuous communication between remote equipment and monitoring center. Supports NSA and SA networks, compatible with various operators   Four-Faith 5G Dual Band Router are fully compatible with the networks of the three major operators, China Telecom, China Mobile, and China Unicom, including the seven major network standards including TD-LTE, FDD-LTE, TD-SCDMA, WCDMA, EVDO, CDMA1X, GPRS / EDGE, etc. The project can be flexibly and freely switched according to the needs of operations. The network selection is more convenient and the traffic charges are more economical. Support dual-band WiFi (2.4G and 5.8G)   2.4GHz and 5.8GHz dual-band WiFi, users can choose to connect. Multi-antenna design to improve data transmission and reception capabilities   Externally widened 4 high-performance antennas, through scientific layout, in a limited space, to achieve greater isolation between the same frequency antennas, effectively reduce the same frequency interference, and improve data transmission and reception capabilities. Rich application scenarios without fear of harsh industrial environments   5G Dual Band Router have been widely used in the M2M industry in the IoT industry chain, such as smart factories, smart medical, smart ports, and new media video transmission.     read more

Description This device provides 1-64 Channel telephone, 2 Channel 10M/100M Ethernet interface (Wire Speed 100M), 2 Channel Ethernet interface is switch interface, can support VLAN. The whole machine works reliably and stably with low power consumption, high integration, small size and easy installation and maintenance. Features Based on self -copyright IC Voice port supports FXO and FXS port,Support FXO/FXS, Magnet telephone Interface, FXO port docking with program-controlled switchboard, FXS port connected to the user’s telephone; 1~64 channel Voice access, Voice FXO / FXS interface, support for caller ID / reverse polarity billing / fax function; Support various sites mutual number allocation function Ethernet interface supports 10/100M, half/full duplex auto- adaptable, support VLAN Ethernet interface can support AUTO-MDIX (crossed line and straightly connected line self-adaptable) Telephone interface with lightning protection, lightning reached IEC61000-4-5 Short circuit current wave 8 / 20μs, the peak output voltage 6KV open standards. The transmission distance is up to 2-120 Km without retranslations – depends on fiber type, and ordering option AC 220V, DC-48V, DC24V can be optional Fiber Multi-mode Fiber 50/125um 62.5/125um Maximum transmission distance 5Km @ 62.5 / 125um multi mode fiber, attenuation (3dbm/km) Wave Length:                                                  1310nm Transmitting power:                                        -12dBm (Min) ~-9dBm (Max) Receiver sensitivity:                                         -28dBm (Min) Link budget:                                                   16dBm Single-mode Fiber 8/125um 9/125um Maximum transmission distance:                    20 – 120 Km (depends on ordering option Transmission distance for 40m module 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km) Wave Length:                                                  1310nm Transmitting power:                                        -9dBm (Min) ~-8dBm (Max) Receiver sensitivity:                                         -27dBm (Min) Link budget:                                                   18dBm Ethernet interface(10/100M) Interface rate:                              10/100 Mbps, half/full duplex auto-negotiation Interface Standard:                       Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) MAC Address Capability:              4096 Connector:                                   RJ45, support Auto-MDIX FXS Phone Interface Ring voltage:                                75V Ring frequency:                            25HZ Two-line Impedance:                    600 Ohm (pick up) Return loss:                                  40 dB FXO Switch Interface Ring detect voltage:                     35V Ring detection frequency:            17HZ-60HZ Two-line Impedance:                   600 Ohm (pick up) Return loss:                                  40 dB Return loss:                                  20 dB Working environment Working temperature:                 -10°C ~ 50°C Working Humidity:                       5%~95 % (no condensation) Storage temperature:                   -40°C ~ 80°C Storage Humidity:                         5%~95 % (no condensation)                    Model     AN-FM-PCM64-2ETH   Functional Description 64 * telephone，2*100 Mbps Ethernet，1* Fiber interface Power Power supply: AC180V ~ 260V; DC –48V; DC +24V Power consumption: ≤10W Dimension Product Size:   485X138X45mm(WXDXH) 19 1U Weight 2.0KG   AN-FM-PCM64-2ETH 64 ports RJ-11 Phone Voice over Fiber Multiplexer with 2 x Fast Ethernet ports, AC or DC power options available, SM or MM fiber with various distances read more

Description The AD-Net AN-HDMI-SDI converter supports the conversion of high-definition HDMI signals to broadcast-grade SDI signal output and can convert standard high-definition or standard-definition HDMI digital signals with audio to broadcast-quality high-definition or standard-definition signal SDI for output. It is widely used in the broadcast room and non-editing production fields of all levels of TV stations using SDI signals and is also widely used in various optical transmission fields using HDMI interfaces. Such as TV stations, places that have restrictions on noise, transmission distance and safety, data center control, information distribution, conference room demonstrations, and teaching environments and company training places. Features Supports the HDMI input format: 480i/576i, 1280*720@60Hz,1920*1080@60Hz Automatically HDMI signal is embedded into the SDI audio signal solution   Specifications   Parameter Description Video input interface HDMI Support agreement HDMI 1.3; HDCP 1.2 Maximum pixel clock 165MHz Resolution 480i/576i/1280*720/60Hz,1920*1080/60Hz Output interface BNC output signal types  HD-SDI(1.485Gbps), 3G-SDI(2.97Gbps) SDI Signal amplitude 0.8Vp-p SDI impedance 75Ω SDI Coupling type AC coupling SDI Signal jitter (Typical values)  HD-SDI≤0.2UI 3G-SDI≤0.4 UI Other Maximum input cable length 3G-SDI 120m note：The transmission distance for different specifications of the cable, test results will be different Power Adapter: DC 5V Power dissipation MAX 2.5W Temperature Operating：-5℃ ~ +70℃ Humidity Operating：5% ~ 90% Size 81*43*23mm Port name Description HDMI IN HDMI signal input SDI OUT-1/2 SDI signal output DC 5V Power adapter input LED indicator Description STA Video signal connection indicator PWR System power indicator Ordering Information AN-HDMI-SDI HDMI to SDI converter with 1 HDMI input, 2 SDI output. read more

Description Displayport To Fiber Converter with USB includes a transmitter and a receiver, which is a high-speed, HDCP compliant fiber optic transport system capable of extending 4K/2K DisplayPort and USB(keyboard or mouse) signals over fiber cable while maintaining flawless image quality. An Displayport input and USB signals from a source device such as a set-top box or Blue-Ray player is converted into light pulses by an optical transmitter module for transmission over fiber optic. On the display side, an optical receiver module converts the light pulses back to an Displayport and USB(keyboard or mouse) signals. The Displayport Fiber Optic Extender supports optical links using either multi-mode or single-mode fiber. These features make the equipment a powerful solution for digital display applications that require flawless signal quality over extremely long cable runs.   Ordering Information AN-KVM-DP-EXT01 Display Port and USB to Fiber Converter Extender, Single mode or Multimode, distance depends on ordered option   read more

Description This AD-net product is industrial-grade 1 port 10/100/1000M Ethernet to 1000Base-X fiber conversion, mainly used for long-distance 20Km transmission of optical fiber networks. This product provides 1 Gigabit optical port; 1 Gigabit Ethernet electrical port. With complete alarm function, the whole machine is stable and reliable, with low power consumption, high integration and small size.   Features Industrial Ethernet series, designed for harsh environments； The device provides 1 Gigabit Ethernet electrical port, 1 Gigabit optical port, shared Gigabit bandwidth, transmission bandwidth is 1000M line speed, Gigabit optical port supports Single mode single fiber 20 Km distance transmission； Electrical interface (RJ45 interface) supports 10/100/1000M adaptive, full/half duplex mode, MDI / MDI-X automatic detection； Support LFP function, can transmit the alarm of the optical port to the electrical port, and can be set to open with the DIP switch； Support the configuration of optical ports 1000BASE-FX and 100BASE-FX, which can be set by DIP switch； Support to display the LINK status of the remote end optical port at the local end and display it with LED light； With functions such as broadcast storm protection, balanced traffic, isolation conflict, error detection and crash reset, it is suitable for high-flow data applications such as video transmission； Support the transmission of VLAN extra long data packets, which can be matched with the switch products supporting IEEE802.1Q protocol, MTU≥10240 ； Support wide range AC and DC input; support internal isolation； The power supply supports overload protection, anti-reverse protection； Comply with industrial level 4 electromagnetic compatibility requirements； Super lightning protection function: lightning protection, anti-induction high voltage, anti-surge, etc.； Fan-less heat dissipation, reducing repair time； IP40 enclosure protection level, able to withstand the test of harsh environments； Rail or wall mounting； Wide temperature type: working temperature -40 ºC ~ + 85 ºC Technical indexes Parameter Specifications Access mode 10/100/1000Mbps Gigabit Ethernet Standard IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-FX Gigabit Ethernet, IEEE802.1q VLAN Transmission distance Single-mode Single-fiber: 20 Km (9/125μm) Category-5 twisted pair: 100m Port One RJ45 connector: connected to UTP category-5 twisted pair One fiber port: Single-mode SC (fiber size: 9/125µm), simplex 1 fiber type only. Typical transmit power 1310/1550nm:≥-9dBm Receiver sensitivity -28dBm ~ -40dBm MTBF 100,000 hours Power Supply AC110-260V； DC-48V Power consumption 5W Operating temperature -40 ~ +85ºC Operating humidity 0%~90% Maintaining temperature -40 ~ +85ºC Maintaining humidity 5% ~ 90% non-condensing Dimensions 60* 50* 35 mm (L*W*H) LED indicators Name Status Explanation PWR On Power on Off Power off LSYN On/Flash The local optical port is connected / receives and transmits data Off The local optical port not connected RSYN On The remote optical port is connected Off The remote optical port not connected (important: In case you pair this converter with other type of optical device, it will sync and work, but this LED will not come up, however, connection will be still up) LNK (RJ45) On/Flash Ethernet port connected / received and transmit data Off Ethernet port is not connected SPD (RJ45) On Ethernet port 1000M Off Ethernet port 100M Installation Interface RJ-45 interface: The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire Fiber interface: SC fiber interface is simplex (1 fiber strand) type, and you need thus you will need only 1 fiber to connect media converters together and still have full duplex Ethernet connection. These media converters utilize WDM – Wave Division Multiplexing technology to make full duplex Ethernet connection over 1 fiber only thus saving fiber infrastructure costs. This is why it is important to ensure, that converters are used in pairs exactly as they are packed in set – A side with 1310/1550nm wavelengths must work in pair with 1550/1310 nm B side (double check sticker right on the fiber port). Important: DO NOT connect A side to A side or B side to B side, in this way, connection will not be established. Connection The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair. And the multi/single mode fiber is connected to SC fiber interface of the optical transceiver. Then switch on. The corresponding LED is on for correct connection. (See the table above for the LED indicator lamp) Figure 1： Basic Network Connection Figure 2： Front panel Select DIP Switch There is a 4-position DIP switch on the front panel of the device, support LFP function, and the configuration of optical ports 1000BASE-X and 100BASE-FX. Figure 3：DIP switch 1 ON LFP-ON OFF LFP-OFF 2 ON Fiber port 100BASE-FX OFF 1000BASE-FX 3 ON Enable Fiber Port is 1000Base-FX full/half auto – negotiation OFF 1000Base-FX full 4 Reserved Ordering Information AN-UMG130-AS-20-mini-I Mini Type Industrial 1310/1550nm IP40 rated single mode single fiber WDM media converter with configurable 100FX/1000FX fiber port and autosensing 10/100/1000 UTP port, optional power supply in set, DC 9 - 55V power input, A side   AN-UMG150-AS-20-mini-I Mini Type Industrial 1550/1310nm IP40 rated single mode single fiber WDM media converter with configurable 100FX/1000FX fiber port and autosensing 10/100/1000 UTP port, optional power supply in set, DC 9 - 55V power input, B side   read more

Description This AD-Net AN-UMG-MM-AS-850-ST-mini-I is an industrial-grade 1 port 10/100/1000M Ethernet to 1000Base-X fiber conversion, mainly used for long-distance 550 meter transmission of optical fiber networks. This product provides 1 Gigabit optical port; 1 Gigabit Ethernet electrical port. With complete alarm function, the whole machine is stable and reliable, with low power consumption, high integration and small size.   Features Industrial Ethernet series, designed for harsh environments； The device provides 1 Gigabit Ethernet electrical port, 1 Gigabit optical port, shared Gigabit bandwidth, transmission bandwidth is 1000M line speed, Gigabit optical port supports Multi mode dual fiber 550 meter distance transmission； Electrical interface (RJ45 interface) supports 10/100/1000M adaptive, full/half duplex mode, MDI / MDI-X automatic detection； Support LFP function, can transmit the alarm of the optical port to the electrical port, and can be set to open with the DIP switch； Support the configuration of optical ports 1000BASE-FX and 100BASE-FX, which can be set by DIP switch； Support to display the LINK status of the remote end optical port at the local end and display it with LED light； With functions such as broadcast storm protection, balanced traffic, isolation conflict, error detection and crash reset, it is suitable for high-flow data applications such as video transmission； Support the transmission of VLAN extra long data packets, which can be matched with the switch products supporting IEEE802.1Q protocol, MTU≥10240 ； Support wide range AC and DC input; support internal isolation； The power supply supports overload protection, anti-reverse protection； Comply with industrial level 4 electromagnetic compatibility requirements； Super lightning protection function: lightning protection, anti-induction high voltage, anti-surge, etc.； Fan-less heat dissipation, reducing repair time； IP40 enclosure protection level, able to withstand the test of harsh environments； Rail or wall mounting； Wide temperature type: working temperature -40 ºC ~ + 85 ºC   Technical indexes Parameter Specifications Access mode 10/100/1000Mbps Gigabit Ethernet Standard IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-SX Gigabit Ethernet, IEEE802.1q VLAN Transmission distance Multi-mode dual-fiber: 550meter (Wavelength: 850nm ) Category-5 twisted pair: 100m Port One RJ45 connector: connected to UTP category-5 twisted pair One fiber port: Multi-mode ST (fiber size: 50,62.5/125µm) Typical transmit power 850nm: -18dBm Receiver sensitivity -28dBm ~ -40dBm MTBF 100,000 hours Power Supply AC110-260V； DC-48V Power consumption 5W Operating temperature -40 ~ +85ºC Operating humidity 0%~90% Maintaining temperature -40 ~ +85ºC Maintaining humidity 5% ~ 90% non-condensing Dimensions 60* 50* 35 mm (L*W*H) LED indicators Name Status Explanation PWR On Power on Off Power off LSYN On/Flash The local optical port is connected / receives and transmits data Off The local optical port not connected RSYN On The remote optical port is connected Off The remote optical port not connected (important: In case you pair this converter with other type of optical device, it will sync and work, but this LED will not come up, however, connection will be still up) LNK (RJ45) On/Flash Ethernet port connected / received and transmit data Off Ethernet port is not connected SPD (RJ45) On Ethernet port 1000M Off Ethernet port 100M   Installation Interface RJ-45 interface: The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire Fiber interface: ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely “TX-RX”, “RX-TX” (direct butting for single optical fiber). If you connect fibers, and LSYN LED still does not come up, please try reverse RX vs TX fibers in places, but only at one side of the converters. Connection The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair. And the multi/single mode fiber is connected to ST fiber interface of the optical transceiver. Then switch on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp) Figure 1： Basic Network Connection Figure 2： Front panel Select DIP Switch : There is a 4-position DIP switch on the front panel of the device, support LFP function, and the configuration of optical ports 1000BASE-X and 100BASE-FX.     Figure 3：DIP switch   1 ON LFP-ON OFF LFP-OFF 2 ON Fiber port 100BASE-FX OFF 1000BASE-FX 3 ON Enable Fiber Port is 1000Base-FX full/half auto – negotiation OFF 1000Base-FX full 4 Reserved Ordering Information AN-UMG-MM-AS-850-ST-mini-I Mini Type Industrial 850nm IP40 rated multimode media converter with configurable 100FX/1000FX fiber port and autosensing 10/100/1000 UTP port, optional power supply in set, DC 9 - 55V power input   read more