- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.comPCI-E Card To 1 Port Remote USB 3.0 Over Fiber Extender | Converter 每 Kit
Previous | 4 / 9 | Next |
Description
PCI-E To USB 3.0 Over Fiber, the device includes a PCI-E to USB3.0 fiber expansion cardㄗhost-sideㄘand a transmitterㄗclient-sideㄘ, which can extend the SuperSpeed USB3.0 to a remote location over 1or 2 core fiber cable, max distance 250m (SM or MM fiber cable), also can split 1 USB3.0 interface to 4 USB3.0 interface. The device can extend high bandwidth USB 3.0 webcams and storage devices ,be widely used in military command and control system, police command and control system, traffic management system, energy and electricity supply industry, government office, medical system, commercial presentation, multimedia and public utilities, Kinect devices etc.
Features
-
Compliant with PCI Express Base 2.0 Specification
-
Compliant with xHCI Specification Revision 1.0
-
Max extension distance 250m (SM or MM fiber cable)
-
Duplex/Single LC fiber connecter
-
Pure hardware design, no driver needed, support plug and play
-
Compliant with Windows 8ㄛWindows 8.1ㄛand Windows 10 operation systems
-
Support USB3.0 SuperSpeed up to 5Gbps, 4 USB 3.0 Type A Receptacle
-
Not backwards compatible with USB 2.0 and USB 1.1
Specifications
Optical
|
Connector
|
Duplex/Single LC
|
Wave length
|
1310nm/1270/1330nm
|
|
Physical
|
Size (L× W ×H)
|
104mm x104mm x28mm
|
Case
|
Aluminum
|
|
Color
|
Black
|
|
N.W.
|
0.5Kg
|
|
Power
|
Sender Voltage
|
5~12V DC
|
sender power consumption
|
<5W
|
|
receiver power consumption
|
<2W
|
|
Environment
|
Working temperature
|
0⊥-50⊥
|
Storage temperature
|
-40-85⊥
|
|
Humidity
|
0-95% (non-condensing)
|
Installation
-
PCI-E to USB3.0 fiber expansion card plug in the PC PCI-E slot
-
Transmitterㄗclient-sideㄘpowered with the DC 5 / 12V adapter
-
Connect the PCI-E to USB3.0 fiber expansion card and transmitter with fiber optics
-
The USB3.0 device connect to the transmitterㄗclient-sideㄘ
Note:
After fiber is connected, the fiber indicator is on, otherwise off. After the USB device is inserted, the USB indicator will be on, otherwise off.
Ordering Information
AN-USB-EXT-PCI-E-3.0
|
PCI-E card to 1 port Remote USB 3.0 Over Fiber Extender | Converter set (card + remote 1 port unit) Kit.
|