- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.comVGA KVM Fiber Optic Extender
Previous | 3 / 3 | Next |
This is a one of most port rich unit in our video extenders range, many ports to connect, however as you can see still can be done in few minutes.
Description
The product consists of the transmitter and the receiver, use advanced uncompressed digital HD video and high-speed digital fiber optic transmission technology, you can easily transmit a variety of resolutions of computers, high-definition video sources, HD DVD / DVR and other equipment output of VGA HD signals over long distances to the remote, and with local VGA loop-through, independent analog audio, anti-interference ability, ensure signal integrity and stability.
Features
-
All-digital, uncompressed, high-definition optical transmission.
-
Compliance with the VGA standard protocol.
-
Support Independent analog audio.
-
Support local VGA loop-through.
-
Automatic identification and configure various display modes.
-
The highest resolution to 1920*1200@ 60Hz.
-
Single / multi-mode fiber transmission.
-
Built-in ESD protection circuitry, can effectively prevent electrostatic damage.
-
Site installation: easy, plug and play, no need to set
Specifications
Operating Temperature Range
|
-5 to +70°C
|
Operating humidity range
|
5 to 90 % RH (no condensation)
|
Input and output video signal
|
VGA
|
Support Video Format
|
1920×1200@60Hz / 1920×1080@60Hz
1600×1200@60Hz / 1680×1050@60Hz
1280×1024@60Hz / 1280×1024@75Hz
1280×800@60Hz / 1280×768@60Hz
1280×720@60Hz / 1024×768@60Hz
1024×768@75Hz / 800×600@60Hz
800×600@75Hz
|
Transmission distance
|
Single mode dual fiber 10KM-40KM
The default is 10KM.
Multi mode fiber not available now
|
Input and output audio interface
|
3.5MMAudio
|
Support input and output audio formats
|
44.1K,48K,96K,176K,192K
|
Input Power
|
DC5V
|
Power Consumption
|
VGA Transmitter 4W
VGA Receiver 4W
|
Dimensions
|
107*104*24mm (L*W*H)
|
Installation
Transmitter:
Receiver:
Port Description
|
VGA Transmitter/ Receiver
|
INPUT/OUTPUT
|
VGA signal input/output
|
AUDIO IN/OUT
|
Stereo audio input/output
|
PC IN
|
USB-B interface, connect to computer, transfer mouse and keyboard signals
|
K / M
|
USB mouse and keyboard interface
|
DC5-12V
|
Power adapter input
|
OPT IN/OUT
|
SFP optical module access, LC interface (T: send, R: receive)
|
Indicator
|
Description
|
V(VIDEO)
|
Video indicator (light: recognition of video signal, off: no video signal recognized)
|
L(LOCK)
|
Video lock signal indicator (light: locked, off: not locked)
|
R(RUN)
|
System indicator (light: normal operation, off: operation error)
|
P(POWER)
|
Power indicator (light: power is normal, off: no power input)
|
-
Connect the VGA input signal to the VGA INPUT of transmitter.
-
Connect the audio input signal to the AUDIO IN of transmitter..
-
Connect the VGA output signal of receiver to the VGA displayer (such as HDTV, etc.).
-
Connect the AUDIO OUT of receiver to the speaker.
-
Use the LC interface optic fiber connect the OPT IN and OPT OUT.
-
Connect the transmitter and receiver to the power supply. When the indicator light is normal, the system runs normally.
Ordering Information
AN-KVM-VGA-EXT01
|
VGA & KVM signal extender over fiber, distance depends on SFP module.
|