- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com4K HDMI to Fiber Optic Extender with RS-232 port Industrial Pin Type Terminal
Previous | 2 / 11 | Next |
Description
The AN-HDMI-EXT10 HDMI Fiber optic extender provides extension of HDMI and 3D signals long distances over one fiber optic cable, it supports high resolution up to 4K*2K@60Hz, EDID copy and RS232 function. The extender can use for a wide range of applications requiring long distance transmission of high resolution with high quality by its good stability and powerful security.
Features
-
Transmits HDMI video signals up to 2km-10km over a pair fiber optic cable;
-
Support video resolution max up to 4Kx2K@60Hz, 1080p@60hz; 3D;
-
Support copy EDID copy, can match many kind display device;
-
Support RS232 undirectional transmission
-
Compliance with HDMI 2.0 standard;
-
High compatibility, can auto-match source and display device;
-
Built-in automatic adjustment system, make the image smooth, clear and stable;
-
Built-in ESD protection system;
-
Simple to install, plug and play;
Specifications
Parameter
|
Description
|
|
Video
|
Standards
|
HDMI 2.0
|
Maximum pixel clock
|
340MHz
|
|
Maximum data rate
|
6.75Gbps
|
|
Resolution range
|
Up to 4Kx2K@60Hz, 3D, 1920*1200@60Hz
|
|
Connector
|
HDMI-A Interface
|
|
HDMI Cable Range
|
<5M( Resolution: 1920*1200@60Hz)
|
|
Impedance
|
100Ω
|
|
RS232
|
Interface
|
Industrial Terminal
|
Signal Direction
|
Unidirectional
|
|
Baud Rate
|
Self-adaptive,Max: 115200bps
|
|
Data Bits
|
8
|
|
Optical fiber
|
Interface
|
SFP model – LC connector
|
Fiber type
|
Single-mode
|
|
Wavelength
|
Single-mode 1310nm/ 1550nm
|
|
Interface bandwidth
|
10Gbps
|
|
Transmission distance
|
Single-mode fiber: standard 2km£»maximum 10km
Multi- mode fiber: < 300M
|
|
Other
|
Power supply
|
The power adapter: DC 12V/1A
|
Power dissipation
|
MAX 5W
|
|
Temperature
|
Operating: -5¡æ ~ +70¡æ
|
|
Humidity
|
Operating: 5% ~ 90%
|
|
Dimension
|
94.5*73*26mm
|
|
The warranty
|
1 year free warranty
|
Installation
Receiver:
Transmitter:
Port name
|
Description
|
HDMI IN/OUT
|
HDMI signal input/output
|
EDID
|
EDID Copy button, Press 3 seconds, copy EDID from HDMI IN display device to system .If HDMI IN interface no display connect, restore default EDID.
|
DC/5-12V
|
Power adapter socket
|
TX/ RX
|
TX: Transmitter RX: Receiver
|
RS232
|
Industrial Terminal
|
FIBER
|
SFP model — LC connector
|
LED indicator
|
Description
|
L
|
Optical fiber signal connection indicator
|
S
|
Video signal connection indicator
|
P
|
System power indicator
|
TX/ Rx L,S, P All bright
|
Devices is on EDID,HDCP, pass-through process
|
-
The HDMI source HDMI optical transceiver connected to the sender,
-
The HDMI optical receiver connected to the display device (such as high-definition TV, mosaic screen, etc.)
-
The use of LC interface fiber optic cable to connect the sending end and the receiving end of the SFP module optical interface,
-
The transmitter and receiver connected to the power supply, when the indicator light is lit, the system is running.
-
On the EDID button use, such as the connection after the launch of the P, S, light, the receiving end of the indicator light, no display or color, the transmitter power to the HDMI port of the monitor and the transmitter HDMI port , Press the EDID button until the S light flashes, stop after the restart power, repeat 1-5 steps can be, if access to dual-fiber EDID and HDCP transparent mode for the signal source for the Blu-ray DVD and the need for two-way RS232 client
Ordering Information
AN-HDMI-EXT10
|
4K HDMI to Fiber Optic Extender with RS-232 port Industrial Pin Type Terminal, power adapter comes in set.
|