- AD-Net
- Video Audio Transmission Equipment
- AHD CVI TVI CVBS Over Fiber
- Video Baluns (Video Over UTP Cat5)
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- VGA KVM Over Fiber
- DVI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- DVI KVM Over UTP Cat5e/Cat6
- VGA KVM Over UTP Cat5e/Cat6
- RCA & XLR Audio Over Fiber Extenders
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- Rack Mount Chassis
- CWDM Multiplexing Systems
- n x E1 G.703 Series Fiber Multiplexer
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- Voice Over Fiber Mux Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- STM1/E3/DS3/T3 Fiber Mux Series
- n x E1 G.703 Series + Ethernet Series
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.comMini Type SD/HD/3G SDI I High density digital audio/video fiber transmission with loop-out port
| Previous | 3 / 12 | Next |
These 3G/SDI/HD converters can be set up literally in seconds if you have all cables prepared and all is ready for installation.
Description
MINI TYPE AD-net’s SDI SD / HD / 3G video digital optical converter adopts international advanced all-digital gigabit optical fiber transmission technology. These standards are used for transmission of uncompressed, unencrypted digital video signals (optionally including embedded Audio and/or Time Code) within television facilities; they can also be used for packetized data. And now – with MINI TYPE AN-DVI fiber optic devices you can deliver those signals on large distances over the fiber optic cables.
HD SDI video signal can be transmitted through 1 single fiber with non-distortion, high-quality, long-distance transmission .This series of video to fiber converter has Stable performance, clear picture quality.,and high Stability with LED Status Indication on the body of device. the working status of devices can be visually observed.At the same time,the switch value,voltage,working status and other reverse useful signal information can be controlled by data RS485.This makes our devices more flexible when different customers’ request comes.
Possible applications for this product, to name few are:
Intelligent Traffic Monitoring System.
Security system
School networking
Industrial monitoring (Electricity,Chemistry,Steel,Oil,Railway & etc)
Military Monitoring (Warehouse,Border,Guards,etc)
TV programme transmission system.
Stadium (For LIVE HD video,audio transmission)
Features
-
One Channel SD/HD/3G SDI I High density digital audio/video fiber transmission
-
Handle all Pathological patterns
-
SD, HD, 3G input auto indentification, support three data rate 270Mbit/s – 1.48Gbit/s – 3Gbit/s£»support 1080P 3Gbps HD-SDI format
-
Support SMPTE-424M 3Gbps HD-SDI, SMPTE-292M HD-SDI, SMPTE-259M SDI and DVB-ASI
-
On Multimode fiber or Single mode fiber transmission£¬10Km ~80Km on single Mode Fiber, 1470~1610nm CWDM wavelengths optional.
-
SFP hot pluggable, flexibly select SFP transceiver according to different transmission distance.
-
Interface HD-SDI£¨BNC£©and LC fiber connector
Specifications
|
SDI input/output
|
||
|
Signal format
|
SMPTE 424M, SMPTE 292M, SMPTE 259M, DVB-ASI
|
|
|
Data rate
|
270Mbit/s – 1.48Gbit/s – 3Gbit/s
|
|
|
Cable Equalization
|
Automatic cable EQ (Belden 1694A cable)
250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s
|
|
|
SDI interface
|
BNC 75 Ohm
|
|
|
Fiber interface
|
LC/PC
|
|
|
Number of tranmitter channel
|
1
|
|
|
Number of tranmitter Loopout
|
1
|
|
|
Transmitter wavelength
|
Standard 1310 nm£¨1550 nm optional¡¢CWDM wavelength optional£©
|
|
|
Transmitter output power
|
-9~-3dBm£¨0±3dBm optional£©
|
|
|
Number of receiver output
|
2
|
|
|
Receiver sensitivity
|
-18dBm¡«0 dBm
|
|
|
General index
|
||
|
Input power
|
DC 5 V
|
|
|
Power consumption
|
Transmitter: 1.8W Receiver: 1.5W
|
|
|
Work Temp
|
-20°C to 70°C
|
|
|
Storage Temp
|
-40°C to 85°C
|
|
|
humidity
|
0 ~ 95% (non-condensing)
|
|
|
Case material
|
Aluminum
|
|
|
Net weight
|
210g /pair £¨with Power supply 440g/pair£©
|
|
Ordering Information
|
AN-SDI-MINI
|
1-ch broadcast 3G/HD-SDI to fiber converter,singlemode,10KM,1xLC.
|