Catacomm Corporation
Sdn Bhd

Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com

AN-MP1 Super Anti-interference Passive Video Balun

Previous 5 / 7 Next

AN-MP1 Super Anti-interference Passive Video Balun Video Baluns (Video Over UTP Cat5) Video Audio Transmission Equipment AD-Net
Quantity
Add Quotation


Description

Along with the development of the CCTV, it’s more and more necessary to utilize a kind of high-quality and low-priced video transferring method. The traditional coaxial cable and fibre-optical transferring methods can only solve the short and long-distance video transferring problems, however, the picture signal transferring for a distance around 1000 meters becomes the bottle-neck of the monitoring field. A series of twisted-pair video transferring equipment researched and developed by AD-net Technology Co. Ltd. use one of the four non-sheltering Cable 5 or above twisted-pairs to transfer the basic band video signal with high-quality, and can realize the transferring of one or more high-quality video signal or control signal in the same cable. What’s more, the signals will not interfere with each other with the nominal transferring distance between 0~1500 meters. This kind of twisted-pair video transferring equipment has super strong anti-interference ability, which makes it the best choice in such strong-interfering environments as the lift, concrete plant, steel plant and electric plant etc.
 
This kind of transferring method has lots of advantages such as convenient wiring, simple installation, high reliability, strong anti-interference ability, good transferring effects and low system cost etc. Its utilization has brought great changes to the traditional wiring methods in all kinds of monitoring places as the intelligent building and residential districts. It provides a high performance/price ratio solution to the monitoring engineering system design.
 

Features

  • Transmission range: 225m(750 feet) working with AD-net Passive Receivers, and 800m(2624 feet) with AD-net Active Receivers;
  • Built-in unique LRC passive anti-interference;
  • Filter circuit, effectively restrain common-mode noise;
  • Built-in transient protection;
  • Directly connected to output terminal of camera.
  • Better interference rejection than coax
  • UTP is less expensive than dedicated coax or fiber

Specifications
 

Video:
Frequency
DC 10Hz
Attenuation
Maximum 1.5dB
Common mode/Differential-mode Rejection
15KHz-5MHz Typical 60dB
Resistance BNC Coax
75ohm
Connector UTP Cable
100ohm
Cable Type:
Specification
24AWG or Thicker Cat-3 above
Resistance
100ohm±20ге
DC Loop Resistance
18ohm/100m
Differential Capacitor
62pf/m
Environment:
Temperature
Operating: -20° to 75° C
Humidity
0~95%
Anti-transient Ability
6000V 1.2μS×50μS
Weight
52g(1.843oz)
Dimensions
Length 52mm(2.047in) * Width 28mm(1.102in) * Height 26mm(1.024in)

Ordering Information

AN-MP1
Single Channel Passive Transceiver for Special Use, Two Screw Terminals for UTP cable, Built-in LRC filter circuit; Male BNC.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Subscribe Newsletter