2 PON port SNMP-GUI-Telnet managed OLT GEPON Optical Line Terminals (OLT) FTTX Access AD-Net Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Supplier, Suppliers, Supply, Supplies

Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.

+603-7803 8228

clyeow@catacomm-corp.com

2 PON port SNMP-GUI-Telnet managed OLT

4 / 8

Quantity

Add Quotation

GEPON products & Applications

Description

AN-OLT-2000 is a best choice for small PON access nodes design where only 1 or 2 ports PON uplink is needed, but still plenty of features and GUI NMS are needed. This OLT uses SFP type PON uplink modules, and you can plug in or 1 or 2, so it can be used as 1 or 2 port OLT.

AN-OLT2000 is the Central Office mainfram box platform of GEPON series products which is researched and developed by our company. It is able to provide a variety of integrated services access, such as broadband, voice, IPTV, CATV. It includes 2 independent fiber terminals (OLT) unit and 2 SFP GE uplink port, 1 console port, 1 Of-band management port, 1 RS485 port.

All the GEPON series products of our company are using passive optical network (PON) technologies, which is better than traditional access products in cost performance, maintenance, expansibility and etc. In GEPON system, as the OLT unit, PON port is responsible for the register of ONU, transfers the Ethernet message received from network in the downlink to EPON optical signal, and sent it to ONU by passive network. In up link, it receives EPON optical signal sent by ONU and transfer it to ethernet message then send to swich core equipment. It includes 2 PON port of 1.25G; usually each PON port can access 32 or 64 pieces of ONU equipment in the transmission distance of 20kms or 10 km (in case of 64 ONU’s). The equipment is composed by high integrated OLT chips and independent control modules, offering reliable assurance for users in functions and performance.

Features

Support ONUs communicate under the same PON port
Support 802.3 MPCP protocol
Support 802.3 OAM and expand protocal(slave port), have abundant OAM function design, offer long-distance management through OLT
Have double-channal independent OLT
Support long-distance update for software
High integration level and integration management, and have the function of double layer exchange
Support data encrypt service in downlink, secure the data transition security for users
Support ONU authentication, avert illegal ONU accesss to network
Support DBA dynamic bandwidth allocation
Support IGMP Proxy

Specifications

PON Interface

1Gbps transmission rate
Network reach: 20 km
Transmitter power: 2.5dbm to 7 dbm
Receiver sensitivity: <=-39dBm
Security: ONU authentication

Standards

IEEE 802.3ah
MII GEPON standards
IEEE 802.1p 802.1Q 802.1d 802.1w
IEEE 802.3ad

Ethernet Service

MAC learning and banding
DBA
Qualities of Service
Rate control
ACL
RSTPP
Broadcast limit
Encryption
Layer 2 isolation
IGMP multicast

Operation Environment

Temperature: -5°C ~ 70°C
Humidity: 10% ~ 90%, non-condensing
Size: 441mm*192mm*43mm
Weight: 3 kg

Power

-48V DC
120~240V AC, broaden compliant
DC and AC concurrency for protection

Apllication scenario:

Useful Info: Initial configuration of 2 port OLT in bridge mode between ONU’s

Ordering Information

AN-OLT2000	Fixed 2 port OLT, 1 UTP 10/100/100 port and 2 SFP slot for downlink, advanced Layer 2 features, EMS GUI manager.
AN-1000BASE-PX-20	1 port PON transceiver module PX-20 (minimum 1 per each OLT, maximum – 2). Distance 20 km.

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Attachment		*only support gif, jpeg, jpg, png, pdf
Messages*