- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com40G Fiber Optical Media Converter
Previous | 8 / 12 | Next |
Here we test both modes of our 40G converters ¨C 1*40G Mode and 4*10G Mode.These 40G converters can be ordered as standalone units with internal power supply, as well as you can order them in chassis card version, in case your application looks like more of PMP ¨C Point to Multipoint type.
Description
AN-UM-40G-3R provides media conversion and distance extension for 40G or 10G Ethernet links. It is hot-swappable with two QSFP sockets for QSFP transceivers. Installation and setup is simple plug and play. Insert the module into any powered Fiber Driver chassis with the QSFP transceivers required for the application, and then connect to the network. Applications include:
-
Media conversion and distance extension for 40G or 10G Ethernet links.
-
Media conversion (multi-mode to single-mode) and link range extension. (The multi-mode QSFP may be used with MPO MM (40G) or with fan-out cables for quad 10G interfaces.)
Features
-
Support 2U Rack(16 Slots) and independent use.
-
Support network management (Web SNMP, Console).
-
3R function.
-
Support Jumbo Frame.
-
Transparent Transpor and very low delay.
-
Support DMI function for QSFP fiber module.
-
Support 1*40G Mode and 4*10G Mode.
-
Support Loopback test function.
-
Support hot plugging.
-
Full State Led display.
-
Easy installation.
Specifications
Performance Data
|
Technical Indexes
|
Equipment function
|
3R Repeater
|
Protocols
|
Multiple functions in one module:
–40G converter/repeater
–Quad 10G optical multiplexer
40G link interface
–Ethernet/IEEE: 802.3ba 40GE-LR4 /SR4
10G interfaces: –9.95 – 11.35 Gbps
|
Access Type
|
40G Ethernet
|
Network managementinformation
|
Card type information
QSFP fiber module DMI function ( Temperature, Voltage, Optical power)
Link status detector
Enable/Disabled Loopback test function
Enable/Disable PRBS Generator and checker function
|
Interface Type
|
QSFP To/From QSFP
|
Transmission Distance
|
Up to QSFP module ( Max 10Km)
|
power requirement
|
Rack-mountable : AC 85 ~ 220V OR DC -48V
Standalone: AC 220V OR -48V
Power consumption: ≤8W
|
Work Environment
|
Operating Temp: 0~ 50 ¡æ
Storage Temp: -10~ 70 ¡æ
Humidity: 5%~90% ( non-condensing)
|
Dimension
|
Card: 11.5mm (W) × 78mm (D)
Standalone: 156mm (W) ×128mm (D) ×32mm (H)
|
Ordering Information
AN-UM-40G-3R
|
40G OEO Fiber OpticMedia Converter (3R)
|