- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.comSFP to SFP Media Converter
Previous | 9 / 20 | Next |
In this video we are practically demonstrating you how these really universal converters can be applied in an application when you need send single mode devices over existing multimode cables or vice versa.Did you know that you can use these SFP-SFP converters not just simply converting Single mode to Multimode and vice versa, but more exotic way, like for example converting 1310 nm to CWDM 1490 nm wavelength? Now, here let us show you interesting scheme, how we can multiplex 4 or more 1310 nm based Gigabit Ethernet channels, over same fiber pair using these CWDM multiplexers.
Description
AD-net SFP to SFP media converter has two SFP sockets. It can convert two optical digital signals of SFP modules, which have same speed, among different wavelength, different distance and different mode (singlemode, multimode, UTP, Fiber). It is used widely in popular applications in all kind of optical digital signals, like Ethernet signals, ATM signals, SDH signals, and control signals etc.
Like for example you can have a situation when:
– Multimode fiber need’s to be converterted to Single mode fiber;
– Multimode wavelength 850 nm need’s to be converted to 1310 nm;
– Single mode wavelenght 1310 nm need’s to be matched with some equipment, but it supports 1550 nm only
– Or, even any exotic conversion like CDWM window to regular 1310/850/1550 nm wavelenghts using this SFP to SFP media converter now becomes possible.
How do you achieve that?
There’s a 2 steps:
1. First, determine your wavelength and it’s datarate
2. Check the SFP modules you need and we will customize and send your SFP to SFP media converter to you.
Features
-
Conversion of optical signals can be carried out between multi/multimode opticalfiber, between single/multimode fibers, or between single/single mode fibers whenthe both SFP modules have same speed.
-
Supporting conversion of 2¡«1250Mbps optical digital signals.
-
Conversion speed fast, less delay, high efficiency
-
Compliant with IEEE 802.3 10BASE-T, 802.3u 100BASE-TX, 100BASE-FX, 1000Base-FX/TX and 2.5G Ethernet Standards
-
If you use ATM/SDH or any other standards – if standard SFP module is used, also support these standard as well.
-
Provides 2 slot (sockets) for universal SFP modules, all major SFP brands are supported;
-
Supporting hot-swap of SFP modules;
-
Front panel Diagnostic LED Indications;
-
Can be installed in AN-CH05 chassis – universal type casing
-
Supports Jumbo Frames, MPLS packed size, brand new chipset is used
Specifications
Interfaces: SFP sockets.
Transmission Rate: 2¡«2.5Gbps
Power : External or Internal switching power: AC100¡«240V/DC5V or 48VDC supported
Ambient temperature£º0 ¡« +60¡æ
Storage temperature£º-20 ¡« +70¡æ
Humidity£º5% ¡« 90%
CE/FCC/ROHS certification
Diagnostic LED’s: Link A, Link B TX/RX, Power, Activity
Dimensions: 70.5mm(L)X94mm(W)X26.5mm(H)
Applications:
One can think dozens of applications for this converter, and your imagination are just limited to SFP module type you use.
For example:
Application scenario Nr.1: Classic application when single mode type media converters need link via multimode fiber, and you can have no way to change modules inside them. Note, that instead of media converter, it can be anything, STM-1 SDH multiplexer, video CCTV transmitter etc.
Application scenario Nr.2 Here’s another interesting scenario. What if you could save on renting a fiber cable twice, paying for 1 fiber only, but still using same dual fiber 1310 nm wavelength devices? Yes, you again can consider SFP to SFP media converter which in this case converts dual fiber application to WDM single fiber
Ordering Information
AN-UM-2-SMC-AS
|
SFP to SFP media converter, supporting modules 155M (i.e fast ethernet), 1.25G (i.e Gigabit Ethernet) or 2.5G, AC or DC power options
|
Additional information
SFP slot
|
2
|
---|