- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com1 x SFP slot + 4 x 10/100 TP UTP Fast Ethernet Copper Port Ethernet Converter
Previous | 6 / 20 | Next |
- Media Converter
- Fast Ethernet Media Converter
- Media Converter With 1 x SFP Slot + 4 x 10/100BaseT Fast Ethernet Ports
Description
4x 10/100Mbps TP ports + 1X 100Mbps fiber Ethernet converter. The TP ports can auto-detect 10/100Mbps, Half/Full duplex and MDI/MDI-X of the connecting devices. Two queues and up to 1522 bytes packet length is supported. Transferring according to the priority in ToS of IP in the packet. Can perfectly meet the “Quality of Service” request in the network. A clear indicator panel including link/activity LED, FDX (full duplex)/collision indicator LED for easy monitoring of network status.
Features
-
In conformity to IEEE 802.3 10 Base-T standard;
-
In conformity to IEEE 802.3u 100 Base-TX/FX standard;
-
Supports 1K capacity MAC address table;
-
IEEE802.3 X for full duplex and back pressure flow control for half duplex;
-
Every TP port can auto-detect MDI or MDI-X connection, no crossover cable is needed for switch/hub cascaded
-
Forward 1552/1536 bytes packets for management;
-
LED indicator to show the device’s work status;
-
VLAN function optional(built-in preset by factory
-
In conformity to safety code of FCC and 15 CLASS A and CE
Specifications
10/100 UTP Port
|
4
|
Fiber Port
|
1 Ports
|
Standards Compliance
|
IEEE802.3 10 Base-T, IEEE 802.3u 100Base-TX/FX
|
MAC address table
|
1K
|
Connector
|
UTP: RJ-45, 10/100Mbps Fiber slot: 100Mbps SC/ST/SFP optional
|
Supported Cable
|
UTP: Cat.5 UTP
|
Multi-mode: 50/125, 62.5/125, 100/140μm
Single mode: 8/125, 8.7/125, 9/125, 10/125μm
|
|
Flow control
|
Full Duplex: IEEE802.3x flow control
Half Duplex: back pressure flow control
|
Operation mode
|
Full Duplex Mode or Half Duplex Mode
|
LED Indicators
|
PWR, F1 Link/Act, F2 Link/Act, TP1¡«TP4 Link/Act, TP1¡«TP4 100
|
Power Supply
|
DC 5V1A
|
Operating Temperature
|
0 ~ +60¡æ
|
Storage Temperature:
|
20 ~ +70¡æ
|
Humidity
|
5% ~ 90%
|
Dimensions
|
25(H)×100(W)×180(D)mm
|
LED indicator
LED Indicator
|
Status
|
Description
|
Link/Act
|
On
|
Fiber/UTP port connection LED, ON means Fiber/UTP port connection ok
|
Blinking
|
Means data is transmission
|
|
PWR
|
On
|
Power connection normal
|
SPD
|
On
|
UTP port transmission speed is 100Mbps
|
Off
|
UTP port transmission speed is 10Mbps
|
Ordering Information
AN-UM-SMC-14
|
1 x SFP slot + 4 x 10/100 TP UTP Fast Ethernet Copper Port Ethernet Converter, AC or DC power.
|
Additional information
SFP slot
|
1
|
---|---|
Fast Ethernet 10/100
|
Any
|