- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com16 Ports + 1 Fiber Port Managed Switch
Previous | 5 / 5 | Next |
Description
AN-M-FE4017 Fast Ethernet Switch provides the power of switching with the ease of use and affordability of traditional shared hubs. Truly Plug-and-Play, the AN-M-FE4017 Fast Ethernet Switch automatically learns about the devices on your network and configures itself, without complicated setup procedures. Dramatic improvements in performance can easily be seen, with speeds of up to 200Mbps per port. Since full bandwidth capability is achieved on each individual port, the congestion problems of shared hubs are easily avoided.
Employing a Buffered Store-and-Forward transmission method with Back Pressure and Flow Control ensures maximum reliability. For added sturdiness, these switches are housed in steel casings and can be rack mounted using the included Rackmount kit. AN-M-FE4017Fast Ethernet Switch comes with 16-switched RJ45 ports and a 100Base-Fx uplink port.
Powerful enough to run your network’s backbone, yet so easy they can be used in place of your desktop hubs, let versatile AN-M-FE4017 Fast Ethernet Switch bring the power of switching to you.
Features
-
Ideal for integrating the 10BaseT and 100BaseTX 16 10/100 and 1 100Base-FX ports. Provide Dedicated Bandwidth in Half or Full-Duplex Modes.
-
NWAY Technology Detects Cabling Type, Speed, and Duplex mode.
-
Transparent for all protocols such as TCP/IP, IPX, XNS, Appletalk, Vines, DECnet, ARP, DECLAT and Lansoft etc.
-
Compatible with All Major Network Operating Systems.
-
Advanced Store-and-Forward Packet Switching Optimizes Data Transfers.
-
One RS-232 console port for Local management.
-
Full wire-speed layer 2 switch on all ports.
-
Support port-based VLANs.
-
Support Port Trunking.
-
2M Buffer Memory.
-
Internal 4k MAC address table – Auto address learning – Auto address aging (default 300 Seconds).
-
Supports both Full/Half duplex ports.
-
Flow control capabilities.
-
Automatic Transmit delay control capabilities and maximum delay guarantee.
-
Broadcast storm filtering.
-
Filtering/Forwarding/Learning Rates.
-
3.6 Gbps aggregate bandwidth with speeds of up to 200Mbps per port Support Comprehensive At-a-Glance LED’s.
Specifications
Standard IEEE 802.3
10BASE-T IEEE 802.3U
100BASE-TX 100BASE-FX
IEEE 802.1Q
VLAN IEEE 802.1D
Spanning Tree IEEE 802.1p
Priority Queue IEEE 802.1x
Power Supply : 90 / 220 V
Power Consumption : Max 30 Watts
Dimension:4 40mm x 220mm x 44.4mm 1U rack-mount
Temperature: 0 to 50°C
Humidity: 5% to 95% non-condensing
Storage Temp. : -25 to +55 C
Ordering Information
AN-M-FE4017
|
16 -port 10/100Mbps-TX and One (100Base-FX /100Base-T uplink port) auto-negotiating Switch.
|