- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com24 Ports 10/100Base-Fx Optical Fiber Ethernet Switch
| Previous | 2 / 16 | Next |
Description
AN-224-X3X1 is an Optical fiber switch that offers 24 port 10/100Base-FX. It supports both Single optical fiber and dual optical fiber, its transmission distance ranges from 2km to 120km. This optical fiber switch works under both Half-duplex and full-duplex modes. It supports the STAR network topology and it is an ideal option for fiber to home (Ftth) optical fiber solution, city optical fiber networks,etc.
Features
-
24 Port 10/100Mbps fiber module for option.
-
Supports STORE AND FORWARD switching.
-
Conforms to IEEE 802.3x back pressure in half-duplex and flow control in full-duplex operation mode.
-
Supports MAC self-learning.
-
Dynamic LED indicators.
-
Supports port-based VLAN.
-
Steel case.
Specifications
|
Standard
|
IEEE802.3, IEEE802.3u, IEEE 802.1x
|
|||||||||||
|
Topology
|
STAR
|
|||||||||||
|
Number of Ports
|
24 Port 100Base-Fx
|
|||||||||||
|
Uplink Ports
|
None
|
|||||||||||
|
Transmission Rate
|
10Mbps: 14880pps,
100Mbps: 148800pps
|
|||||||||||
|
Switching mode
|
Store and Forward
|
|||||||||||
|
Flow control mode
|
IEEE 802.3x full-duplex flow control and back pressure flow control
|
|||||||||||
|
LED Indicator
|
LED status of Link, activity, Full/half duplex, speed, and power on diagnostic function
|
|||||||||||
|
Cable Support
|
10Base-T: 3, 4 or Cat 5 shielded / unshielded twisted pair, 100 meters max;
100Base-TX: Cat 5 shielded / unshielded twisted pair, 100 meters max.
100Base-Fx: 8.3μm, 8.7μm, 9μm and10μm on single mode fiber and 50, 62.5 and 100μm on multi-mode fiber
|
|||||||||||
|
Power supply
|
AC:220V or DC:-48V
|
|||||||||||
|
Temperature Humidity
|
|
|||||||||||