- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com15 Port 10/100Base-Tx + 1 Port 10/100Base-Fx Optical Fiber Ethernet Switch
Previous | 8 / 16 | Next |
Description
AN-31A-X3X1 is an Optical fiber switch that offers 1 port 10/100Base-FX optical fiber and 15 port 10/100Base-Tx Copper. It supports both Single optical fiber and dual optical fiber, its transmission distance ranges from 2km to 120km. This optical fiber switch works under full-duplex mode. It supports the STAR network topology and it is an ideal option for fiber to home (Ftth) optical fiber solution, city optical fiber networks,etc.
Features
1. 15 port 100base-Tx
2. 1 port 100Base-Fx optical fiber
3. Store and forward mode
4. 10/100M auto-negotiation, maximum speed to 20/200M (full-duplex)
5. Supports IEEE 802.3x full-duplex flow control and back pressure half-duplex flow control
6. Supports MAC self-learning
7. Automatic MDI/MDI-X configuration
8. Port base VLAN
9. Built-in 12Kx64 SRAM
10. Supports 2048 MAC addresses table
11. LED status of Link, activity, Full/half duplex, speed,and power on diagnostic function
12. Steel case
Specifications
Protocol
|
CSMA/CD
|
|||||||||||
Standard
|
IEEE802.3 10BASE-T,IEEE802.3u, 100BASE-TX/FX, IEEE802.3x
|
|||||||||||
Topology
|
STAR
|
|||||||||||
Number of Ports
|
15 Port 10/100Base-Tx And 1 Port 100Base-Fx optical fiber
|
|||||||||||
Uplink Ports
|
None
|
|||||||||||
Transmission Rate
|
10Mbps: 14880pps, 100Mbps:148800pps
|
|||||||||||
Switching mode
|
Store and Forward
|
|||||||||||
Flow control mode
|
IEEE 802.3x full-duplex flow control and back pressure flow control
|
|||||||||||
LED Indicator
|
LED status of Link, activity, Full/half duplex, speed, and power on diagnostic function
|
|||||||||||
Cable Support
|
10Base-T: 3, 4 or Cat 5 shielded / unshielded twisted pair, 100 meters max.,
100Base-TX: Cat 5 shielded / unshielded twisted pair, 100 meters max.
100Base-Fx: 8.3μm, 8.7μm, 9μm and10μm on single mode fiber and 50, 62.5 and 100μm on multi-mode fiber
|
|||||||||||
Fiber Cables/Connectors
|
Single Mode/Multi Mode fiber cable
SC,ST connector optional
|
|||||||||||
Power supply
|
AC:220V or DC:-48V
|
|||||||||||
Temperature Humidity
|
|