- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com16 E1 Digital Cross Connect System
| Previous | 1 / 7 | Next |
Description
The connection matrix connects any incoming 64Kbps timeslot to any outgoing 64Kbps timeslot. AN-DM-DXC16 can be used in the application like drop-and-insert, distribution and collection.
The main applications are found in the local switching of Nx64k leased line connections, and the concentration of Nx64k services onto 2 Mbps E1 circuits. This solution is particularly useful for smaller concentration points where the investment in backbone switching equipment might be too high.
Features
-
Provide programmable non-blocking cross-connection of 64K channels
-
16 x E1 interfaces with BNC/SMB or RJ45 at your choice
-
Can be managed or CLI through the serial port on the back-panel and via GUI manager
-
Optical uplink interface optional
-
Any arbitrary combination of 64k time-slots
-
Graphical user manager – GUI software in set
Specification
Cross connect capacity
1024 x 1024
Optical interface
Line code:1B1H
Line Data rate: 33.792 Mbit/s
Transmission power: > 10dBm (LD)
Receiver sensitivity: <38dBm
Connector: FC or SC
E1 interface:
Complies with ITU G.703 standard
Line code: HDB3
Rate: 2048 Kbit/s +/- 50ppm
Connector: BNC/SMB for 75 ohm unbalance,RJ-45 for 120 ohm balance
Console port
RS-232 port for ASCII terminal
Data format: 9600bps, 8 bit data, 1 bit stop flag
Environment:
Power supply: 220 VAC + 48VDC doubled
Power consumption: <8W
Dimensions: 19′ 1U
Operating temprerature: -5 C ~ +45 C
Storage Temperature: -20 C ~ +70 C
Relative humidity: 5 % to 95 %
Ordering Information
|
AN-DM-DCX16/BNC/DC
|
16 E1 digital cross connect, BNC for E1, 48 DC power supply.
|
|
AN-DM-DCX16/BNC/AC
|
16 E1 digital cross connect, BNC for E1, 96 – 240 AC power supply.
|
|
AN-DM-DCX16/BNC/AC/DC
|
16 E1 digital cross connect, BNC for E1, 96 – 240 AC power supply + DC 48 V.
|
|
AN-DM-DCX16/RJ-45/48
|
16 E1 digital cross connect, RJ-45 for E1, 48 DC power supply.
|
|
AN-DM-DCX16/RJ-45/220
|
16 E1 digital cross connect, RJ-45 for E1, 96 – 240 AC power supply.
|
|
AN-DM-DCX16/RJ-45/220/48
|
16 E1 digital cross connect, RJ-45 for E1, 96 – 240 AC +DC 48 power supply.
|