Catacomm Corporation
Sdn Bhd

Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com

AN-miniSDH

Previous 5 / 5 Next

AN-miniSDH MiniSDH Systems (63 E1, V.35, ETH) SDH/MSPP Systems AD-Net
Quantity
Add Quotation


Description


As a key member of AD-net SDH/MSPP Product family, AN-miniSDH is a carrier-class, cost-effective, compact (only 1U high) SDH/MSPP platform that is designed for applications in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers.
 
AN-miniSDH is a modularized unit with 4 universal slots, supporting different interface cards, such as STM-1 fiber optic cards, E1 cards, Ethernet cards (EoS VCAT), and V.35 card. The main board cross-connect capacity is 504—504 VC-12s (8—8 VC-4s), allowing non-blocking adding/dropping services among different interfaces. It supports the hybrid transmission of SDH, PDH, Ethernet and N—64K V.35 services within the same equipment. With the large capacity cross-connect matrix, the AN-miniSDH can be configured as ADM, TM, and REG. It is suitable for multiple network topologies such as point-to-point, chain, ring, hub, and mesh networks.
 

Features

  • 4 General Slots, supporting a range of interface cards, including SDH, PDH, Ethernet, and V.35 cards.
  • Ethernet service supporting GFP encapsulation, VC12 virtual concatenation (1~63 VC12).
  • Large cross-connect matrix capacity is 504—504 VC-12s (8—8 VC-4s) and powerful networking ability.
  • LCD display for system configuration and alarm.
  • Inter-working with popular SDH/MSPP products of various vendors.
  • Suitable for 3G access network transmission.
  • Easy commissioning and maintenance.
  • High integration, compact design.
  • High reliability, low CAPEX and OPEX.

Specifications
 

SDH signal interface:
Bit rate£º 155520kbit/s (STM-1£¬G.957, framing G.707)
Line code£º Scrambled NRZ
Optic ports£º1 or 2 optic ports selected
 
V35 port
Comply with ITU-T V.35/V.36£¬ DCE mode£¬DTE mode£¬N ×64kbps £¨1 £ N £ 32£©

Ethernet data port
Two 100Base-Tx Ethernet ports.
Comply with IEEE 802.3 related suggestions.
10M/100M auto-adapted
The channel rate of Ethernet can be adjusted among 2M to 100M, and the rate can be decided by setting the quantity of VC12(1~46).
Half duplex/full duplex auto-adapted
HP auto-MDIX£¬MDI and MDI-X auto-adapted,connector:RJ45 socket

E1 port
Comply with ITU-T G.703.Bit rate:2048kbit/s ±50ppm£¬code£ºHDB3, 75ohm or 120ohm
 
Front panel functional drawing scheme are below:
 
 
Application scenario
 
 
Application Scenario Nr.1  SDH core network integration with FtFH/FTTB Ethernet networks.
 
 
Application Scenario Nr.2: SDTH core, and access networks with varios AD-net SDH multiplexers involved
 

Ordering Information
 

AN-M-SDH-CH
Multi-service SDH access equipment, core chassis with 4 physical slots for modules. AC/DC power supply.
AN-M-SDH-STM1v1
Single STM-1 optical interface card with 1-port STM-1 optical interface, connector: SC.
AN-M-SDH-STM1v2
Single STM-1 optical interface card, 1-port STM-1 optical interface, Single 1310nm, connector£ºSC.
AN-M-SDH-STM1-WDM
Single STM-1 optical interface card, 1-port STM-1 optical interface, Single mode WDM (BIDI) 1310nm, connector£ºSC.
AN-M-SDH-STM1v3
Single STM-1 optical interface card, 1-port STM-1 optical interface, 1310nm, high-power, transport distance < 70km.
AN-M-SDH-STM1v4
Single STM-1 optical interface card, 1-port STM-1 optical interface, 1550nm, high-power, DFB, transport distance < 120km.
AN-M-SDH-2-STM1v1
Double STM-1 optical interfaces card, 2-port STM-1 optical interface£¬connector: SC.
AN-M-SDH-2-STM1v2
Double STM-1 optical interfaces card, 2-port STM-1 optical interface and 1-port is high-power£¬transport distance < 70km.
AN-M-SDH-2-STM1v3
Double STM-1 optical interfaces card, 2-port STM-1 optical interface and 1-port is high-power£¬transport distance < 120km.
AN-M-SDH-2-STM1v4
Double STM-1 optical interfaces card, 2-port STM-1 optical interface£¬high-power, transport distance < 70km.
AN-M-SDH-2-STM1v5
Double STM-1 optical interfaces card, 2-port STM-1 optical interface£¬high-power, transport distance <120km.
AN-M-SDH-2-STM1v6
Double STM-1 optical interfaces card, 2-port STM-1 optical interface and 1-port is high-power and 1-port is DFB high-power.
AN-M-SDH-2-STM1v7
Double STM-1 optical interface card, 1-port STM-1 optical interface, Single mode WDM (BIDI) 1310nm, connector£ºSC.
AN-M-SDH-2-STM1v8
Double STM-1 optical interface card, 1-port STM-1 optical interface, Single mode WDM (BIDI) 1550nm, connector£ºSC.
AN-M-SDH-2-STM1v9
2-port STM-1optical interface, single fiber, 1310nm for east, 1550nm for west.
AN-M-SDH-4E1-75
4-port E1, 75-ohm tributary card.
AN-M-SDH-4E1-120
4-port E1, 120-ohm tributary card.
AN-M-SDH-8E1-75
8-port E1, 75-ohm tributary card.
AN-M-SDH-8E1-120
8-port E1, 120-ohm tributary card.
AN-M-SDH-2V35
2-port framed V35 serial interface tributary card.
AN-M-SDH-2ETH
2-port Ethernet sharing the transport channel, transmit VC12.
AN-M-SDH-4ETH
4-port Ethernet separate VC mapping on each of the ports, transmit VC12.
C-75-OHM
75-ohm cable.

 

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Subscribe Newsletter