- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com10Base-T Ethernet to 10Base-FL Fiber Optical Media Converter
| Previous | 8 / 9 | Next |
Description
AN-10BT-10BFL 10Base-T to FL Converter is designed to convert your existing 10Base-T Ethernet to a 10Base-FL network with single mode fiber optic cable up to 20,000 meters. The converter simply repeats sig-nals from 10Base-T Ethernet to a suitable form for transmission over fiber optic cables to 10Base-FL link. No more pair cross-over patch cords. You can always use pin-to-pin patch cords between Converter and Hub or workstation, simply select the right position on the 10Base-T switch for either Hub or Workstation. The LMON, COL, XMT, POWER, RCV, JAB and LINK LED lights simplify trouble shooting and network maintenance.
Features
-
Complies with 802.3 10Base-T and 10Base-FL standards.
-
Provides media conversion from UTP to Fiber Optic media types.
-
Extends network span from 2km(multimode fiber) up to 20km(single mode).
-
Interoperable with other 10Base media converters, 10Base, 10/100Base-T NICs, hubs or switches.
-
Provides LEDs for easy network monitoring.
Specifications
Interface
RJ-45 jack for 10Base-T , ST connector for 10Base-FL
Category 3, 4 or 5 UTP cable for 10Base-T
Cable length
62.5/125um Multi-mode duplex fiber optic cable for 10Base-FL (AN-10BT-10FL/MM)
100 meters max. for UTP
20000 meters max. for fiber optic Single-mode (AN-10BT-10FL/SM)
2000 meters max. for fiber optic Multi-mode (AN-10BT-10FL/MM)
Transmission type
Base band
Connection switch
2-position 10Base-T switch on RJ-45 side (hub or W/S)
LEDs
Power, Lmon, Col, Jab, Xmt, RCV,LINK
Temperature
0 to 55C (standard operating)
Humidity
10 to 90% (non-condensing)
Power adaptor
12V DC input, 1.5 Amp
EMI
Meets FCC Class A Subpart B of Part 15 Requirement
Dimensions
4.2″ x 2.2″ x 0.8″
Application scenario
Ordering Information
|
AN-10BT-10BFL/MM
|
Ethernet 10Base-T/FL Multi-Mode Converter.
|
|
AN-10BT-10BFL/SM
|
Ethernet 10Base-T/FL Single-Mode Converter.
|