Catacomm Corporation
Sdn Bhd

Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com

Enhanced High Speed Ethernet LAN extender

Previous 11 / 11 Next

Enhanced High Speed Ethernet LAN extender High Speed LAN & Ethernet Over Copper Extenders Interface Converters AD-Net Enhanced High Speed Ethernet LAN extender High Speed LAN & Ethernet Over Copper Extenders Interface Converters AD-Net Enhanced High Speed Ethernet LAN extender High Speed LAN & Ethernet Over Copper Extenders Interface Converters AD-Net Enhanced High Speed Ethernet LAN extender High Speed LAN & Ethernet Over Copper Extenders Interface Converters AD-Net Enhanced High Speed Ethernet LAN extender High Speed LAN & Ethernet Over Copper Extenders Interface Converters AD-Net
Quantity
Add Quotation


Video shows installation example of IP camera extended over UTP cable, however, every Ethernet device can be used, such as PCs, LAN switches etc.In this video below, we are looking at interesting way to use these extenders in Point-to-Multipoint way using Copper Splitter in middle, and more on that C we demonstrate that using IP SIP phones as an end CPE devices here. So, what happens here is that signal gets really passively split over 2 (and can be more) copper cables, and central device works as master side, while remote device C as slave side.Now, below here again, we have copper UTP cable, IPPBX and remote phone which we need extend far beyond 100m of traditional ethernet distance limitations. Just if in above video we used Point to Multimode, heres more traditional Point to Point setup. Of course, instead of IP Phones, you can have any other Ethernet IP device, such as IP camera, PC, Wifi Router, etc.

Description


The AD-net model AN-LAN-EXT-ENH Ethernet over 2-wire LAN Extender is a compact media converter that allows 10/100 BaseT Ethernet to be transmitted using any 2-wire copper cables. These devices are often used in legacy installations where existing wire is re-used as part of an upgrade to IP devices. You can use one master at the network-end can support multiple slaves and connected devices.
 
These LAN extenders are extremely simple to use and easy configuration. Status LEDs indicate power and link connectivity/activity for RJ45 and 2-wire ports. This product can be widely used for network extension system, network security system, network information publishing system, network renovation and expansion systems, railway, urban traffic, mining and telecommunication, etc.
 

Features

  • Transmit 10/100 BaseT Full Duplex Ethernet up to 2000m over any 2-wire copper cable.
  • One AD-net master at the network-end can support multiple slaves and connected devices.
  • Different terminals to choose such as RJ45, RJ11, BNC, Two Pins terminals etc.
  • Low power consumption, high performance error correction coding technology.
  • Built-in transient protection; Industrial temperature range.
  • LAN extender for IP camera traffic or LAN – it’s universal.
  • Easy configuration, plug and play.

Specifications
 

Category
Description
Power
Available Voltage Range
12VDC
Power Consumption
1.5W
Transmission / Rate
Standard Compliance
IEEE1901, IEEE802.3
Up down Agreement
CSMA/CA
Physical Bandwidth
500Mbps
Actual Throughput
130Mbps
Encryption Way
128-bit AES Encryption
Reliability
MTBF
30000 hours
Product Physical Characteristic
Dimensions (L × W × H)
108mm×84mm×24mm
(including the terminal length)
 
Material
Aluminum
Net Weight
0.24KG/Pair
Operating Environment
Working Temperature
-20 65
Storage Temperature
-20 70
Working Humidity
20 85%
Storage Humidity
10 90
The above data for TCP throughput, is the measured data in the actual environment. The maximum physical layer data is 240Mbps. For coaxial cable transmission, performance is more stable, but it also affected by the cable and terminal matching methods. On 1000 meters cable, accessing eight nodes, the distance between two nodes is 100 meters apart; The above tests are all finished in the field test.
lan extender
Accessories and possible cables to use:
lan extender
lan extender

Ordering Information
 

AN-LAN-EXT-ENH-240-RJ11A/B
Enhanced LAN extender for twisted pairs or telephone cables, RJ11 for line interface, RJ-45 for LAN port, included 12V power adapter. Raw data layer speed up to 240 Mbit/s.
AN-LAN-EXT-ENH-500-RJ11A/B
Enhanced LAN extender for twisted pairs or telephone cables, RJ11 for line interface, RJ-45 for LAN port, included 12V power adapter. Raw data layer speed up to 500 Mbit/s.
AN-LAN-EXT-ENH-240-RJ45A/B
Enhanced LAN extender for twisted pairs or telephone cables, RJ45 for line interface, RJ-45 for LAN port, included 12V power adapter. Raw data layer speed up to 240 Mbit/s.
AN-LAN-EXT-ENH-500-RJ45A/B
Enhanced LAN extender for twisted pairs or telephone cables, RJ45 for line interface, RJ-45 for LAN port, included 12V power adapter. Raw data layer speed up to 500 Mbit/s.
AN-LAN-EXT-ENH-240-PINA/B
Enhanced LAN extender for twisted pairs or telephone cables, 2 pin terminals for line interface, RJ-45 for LAN port, included 12V power adapter. Raw data layer speed up to 240 Mbit/s.
AN-LAN-EXT-ENH-500-PINA/B
Enhanced LAN extender for twisted pairs or telephone cables, 2 pin terminals for line interface, RJ-45 for LAN port, included 12V power adapter. Raw data layer speed up to 500 Mbit/s.
AN-LAN-EXT-ENH-240-BNCA/B
Enhanced LAN extender for twisted pairs or telephone cables, BNC connector for line interface, RJ-45 for LAN port, included 12V power adapter. Raw data layer speed up to 240 Mbit/s.
AN-LAN-EXT-ENH-500-BNCA/B
              
Enhanced LAN extender for twisted pairs or telephone cables, BNC connector for line interface, RJ-45 for LAN port, included 12V power adapter. Raw data layer speed up to 500 Mbit/s.

 

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Subscribe Newsletter