Catacomm Corporation
Sdn Bhd

Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com

DIN-rail Mounted 2-wire Ethernet Extender up to 1000 m

Previous 9 / 11 Next

DIN-rail Mounted 2-wire Ethernet Extender up to 1000 m High Speed LAN & Ethernet Over Copper Extenders Interface Converters AD-Net DIN-rail Mounted 2-wire Ethernet Extender up to 1000 m High Speed LAN & Ethernet Over Copper Extenders Interface Converters AD-Net DIN-rail Mounted 2-wire Ethernet Extender up to 1000 m High Speed LAN & Ethernet Over Copper Extenders Interface Converters AD-Net
Quantity
Add Quotation


Description


AN-LAN-EXT-ENH-D is a DIN-Rail Mounting Ethernet Extender, it allows 10/100 BaseT Ethernet to be transmitted using any 2-wire cable. This device contains the Master unit and Slave unit, which supports point to point and point to multi-point network transmission. The Maximum Transmission can reach up to 1,000m, the Maximum physical bandwidth can reach up to 200Mbps.
 
Now this device has been widely used for Elevator IP camera and Network Multi-media Screen Display network data signal transmission. This Ethernet Extender has the strong anti-interference ability and can effectively restrain elevator frequency conversion motor interferences and other various interferences inside the elevator. Meanwhile, this transmission solution also can save about 30% cost than optical fiber.
 
Now this device has been widely used for network extension system, network security, network information publishing system, network renovation and expansion systems, railway, urban traffic, mining and telecommunication, etc.
 

Features

  • Transmission distance up to 1,000m.
  • Duplex network, maximum physical bandwidth up to 200Mbps.
  • 35mm guide rail type installation, Wide input voltage range(12~24VDC).
  • Plug and play, transparent transmission, no adjustment and no need to change the upper software.
  • Low power consumption, communication channel dynamic adjustment and high performance error correction coding technology.
  • Any 2-wire cables can be used to transmit high-speed network data signal.
  • Support point to point and point to multi-point connection.
  • Support Qos data package optimization transmission.
  • Support network multicast technology.
  • After offline restore network by itself.

Specifications
 

Category
Description
Power
Available Voltage Range
1224VDC±15%
 Power Consumption
≤2W / PC
Transmission / Rate
Standard Compliance
IEEE1901, IEEE802.3
Up down agreement
CSMA/CA
Physical speed
200Mbps
Encryption way
128-bit AES Encryption
Reliability
MTBF
30000 hours
Product Physical Characteristic
Dimensions (L × W × H)
98mm×66.5mm×25mm
Material
Aluminum
Net weight
175g/PC
Operating Environment
Working Temperature
-20桫60
Storage Humidity
95% Non-condensation

Installation
 

Cables Type and Network Data Rate
 
The graph below shows AN-LAN-EXT-ENH-D transmission distance and network data rate. The data differs from the cables types. When you use this device, please choose the suitable cables in line with your demands.
123123























The above data for TCP throughput, is the measured data in the actual environment. The maximum physical layer data is 200Mbps. For coaxial cable transmission, performance is more stable, but it also affected by the cable and terminal matching methods. The above tests are all finished in the field test.
 
Installation Instructions
figure
figure2
capture
















Installation Diagram
 
scheme1
Network LCD Display Installation Diagram
 
3cheme2
Multiple LCD Screen Display Installation Diagram
 
scheme2
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Subscribe Newsletter