- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com16 Ports Converter With L9 (DIN1.6/5.6) Connectors
Previous | 2 / 7 | Next |
Description
AN-IC16-L9 G.703 rack mount balun panel lets you match the connectors, impedance and signal characteristics of up to 16 dual coax L9 (DIN1.6/5.6) connections (75 ohm) with up to 16 twisted pair connections (120 ohm). Operating in compliance with the CCITT G.703 specification, the AN-IC16-L9 occupies only 2U (3.5″/8.9 cm) of vertical rack space in a 19″ (48.3 cm) rack-allowing for efficient multiport matching.
L9 (DIN1.6/5.6) connectos, used in this series AN-IC16-L9 balun panels are screw coupling miniature coaxial connectors, which are developed and manufactured according to specification of IEC169-13, CECC 22240 and DIN 47295. They have the characteristics of small size, high mechanical and electrical stability and used in many types of communication equipments.
Features
-
Connects 75 ohm dual coax to 120 ohm twisted pair (or visa versa)
-
Bi-directional signal conversion according to CCITT G.703
-
Data rates up to 2.048 Mbps
-
Low profile design
-
Mounts in standard 19″ (48.3 cm) Rack
-
No AC power or batteries required
-
L9 (DIN1.6/5.6) BNC 75 ohm type connectors
-
RJ-45 120 OHM type connectors at opposite side.
Specifications
Transmission Line: CCITT G.703 (unstructured) E1 type
Data Rate: 2.048 Mbps
75 Ohm Connection:
Characteristic impedance: 75Ω
Working voltage: 330V max
Frequency range: 0~1GHz
Dielectric withstanding voltage: at sea level 1000V (volts RMS)
Contact resistance: center contact ≤10.0mΩ
Outer contact ≤5.0mΩ
Insulation resistance: ≥1000MΩ
120 Ohm Connection: Shielded RJ-45 jack
Power Supply: none required
Link-to-Data Isolation: 500 Volts AC/DC
Temperature Range: 32-122 °F (0-75 C)
Data Rate: 19″ wide x 3.5″ high x 1.9″ deep (48.3 x 8.9 x 4.8 cm)
Application Scenario
Additional information
Port Quantity
|
16
|
---|
Ordering Information
AN-IC16-L9
|
G.703 Balun Panel (75-Ohm L9 (DIN1.6/5.6) to 120-Ohm RJ-45) for modular 19' rack mount's
|