- AD-Net
- Video Audio Transmission Equipment
- AHD CVI TVI CVBS Over Fiber
- Video Baluns (Video Over UTP Cat5)
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- VGA KVM Over Fiber
- DVI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- DVI KVM Over UTP Cat5e/Cat6
- VGA KVM Over UTP Cat5e/Cat6
- RCA & XLR Audio Over Fiber Extenders
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- Rack Mount Chassis
- CWDM Multiplexing Systems
- n x E1 G.703 Series Fiber Multiplexer
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- Voice Over Fiber Mux Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- STM1/E3/DS3/T3 Fiber Mux Series
- n x E1 G.703 Series + Ethernet Series
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.comE3 electrical 每 optical converter (E3 fiber modem)
| Previous | 3 / 4 | Next |
Description
AN-E3 E3 fiber converter (E3 fiber modem) can be used to provide 34.36 (E3) signal conversion between electrical interface and optical interface of E3 based network interface. It conforms to the ITU- T G.703 T3 recommendation. The converter features compactness, light weight, low power consumption and high reliability.
The 34M E3 fiber converter optical / electrical operates on 1310 nm lasers, with a typical transmission distance of 40 km over single mode optical fibers. For longer hops, 1550 nm lasers can be selected for 100 km and more distances. WDM single fiber single strand also is available on request.
Exterior power supply, all the functional blocks are integrated on a single PC board, which makes the converter compact and reliable. 220 V AC or – 48 V DC power options are available by selecting an appropriate plug-in power unit.
AN-E3 electrical interfaces are BNC sockets, “IN” is incoming E3 electrical signal and “OUT” is outgoing E3 electrical signal. The optical interfaces are SC type sockets using receive and transmit integral whole mold piece.
Features
-
High reliability, comply to ITU-T G.703.
-
Single Fiber Bi-Directional is selectable.
-
State-of-the-art design, ensure normal working under different environment.
-
Supports local and remote loop – back on electrical or optical interface for system diagnostic.
-
Suitable for PDH E3 interface interconnection.
-
Simple operation and maintenance.
-
Compact design and low power consumption.
-
Simply to use & plug & play E3 fiber converter (E3 fiber modem).
Specifications
|
Items
|
Description
|
|
|
Electrical Interface
|
S tandard
|
ITU-T G.703 Compliant
|
|
Data Rate
|
34.368 Mb ps
|
|
|
Line Code
|
HDB3
|
|
|
Physical Connector
|
BNC Coaxial
|
|
|
Optical Interface
|
Bit rate
|
34.368 Mbps
|
|
Coding
|
NRZ
|
|
|
Connector
|
SC
|
|
|
Light source
|
Laser Diode
|
|
|
Wave length
|
1310 nm (Typical), or 1550 nm (Optional) or Single Fiber Bi-Directional (Optional)
|
|
|
Transmit power
|
-12 dBm (1310 nm ) / -5 dBm (1550 nm )
|
|
|
Receive sensitive
|
-36 dBm (1310 nm ) / -38 dBm (1550 nm )
|
|
|
Power supply
|
AC 220V
|
Range 165 V to 265 V
|
|
DC -48V
|
Range -36V to -72V
|
|
|
Power Consumption
|
<3 W
|
|
|
Environment
|
Working Temperature
|
0 50 C
|
|
Relative Humidity
|
<90 % (Non condensing )
|
|
|
Dimension
|
WxHxD(mm): 205 x 13 5 x 4 6
|
|
Application diagram:
