- AD-Net
- Video Audio Transmission Equipment
- AHD CVI TVI CVBS Over Fiber
- Video Baluns (Video Over UTP Cat5)
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- VGA KVM Over Fiber
- DVI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- DVI KVM Over UTP Cat5e/Cat6
- VGA KVM Over UTP Cat5e/Cat6
- RCA & XLR Audio Over Fiber Extenders
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- Rack Mount Chassis
- CWDM Multiplexing Systems
- n x E1 G.703 Series Fiber Multiplexer
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- Voice Over Fiber Mux Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- STM1/E3/DS3/T3 Fiber Mux Series
- n x E1 G.703 Series + Ethernet Series
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.comDS3 T3 Fiber modem / extender / converter
| Previous | 2 / 4 | Next |
Description
AN-DS3 modem / converter / extender can be used to provide 44.736M (T3) signal conversion between electrical interface and optical interface of DS3 / TS3 based network interface. It conforms to the ITU- T G.703 T3 recommendation. The converter features compactness, light weight, low power consumption and high reliability.
The 45M optical / electrical converter operates on 1310 nm lasers, with a typical transmission distance of 40 km over single mode optical fibers. For longer hops, 1550 nm lasers can be selected for 100 km and more distances. WDM single fiber single strand also is available on request.
Exterior power supply, all the functional blocks are integrated on a single PC board, which makes the converter compact and reliable. 220 V AC or – 48 V DC power options are available by selecting an appropriate plug-in power unit.
AN-DS3 electrical interfaces are BNC sockets, “IN” is incoming T3 electrical signal and “OUT” is outgoing T3 electrical signal. The optical interfaces are SC type sockets using receive and transmit integral whole mold piece.
Features
-
High reliability, comply to all relevant standards.
-
Single Fiber Bi-Directional is selectable.
-
State-of-the-art design, ensure normal working under different environment.
-
Supports local and remote loop – back on electrical or optical interface for system diagnostic.
-
Suitable for DS3/T3 interface interconnection.
-
Simple operation and maintenance.
-
Compact design and low power consumption.
Specifications
Optical interface
Connector: SC – using receive and transmit integral whole mold piece.
Wavelength: 1.31μ£í(typical), with a typical transmission distance of 40 km
over single mode optical fibers,
1550 nm for up to 100 km
Electrical interface
Comply with ITU-T G.703 T3 recommendation
Bit rate: 44.736Mbit/s
Impedance: 75 ohm (unbalanced)
Power
DC type: –48V£¨–36V to –60V£©
AC type: ~220V£¨176V~265V£©
Power consumption:<3W
Working environment
Temperature: 0 ~50°C
Humidity: ≤90% non condensing 1.5.
Dimension
Width: 205mm
Height: 46mm
Depth: 135mm
Application scenario:
