- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
USB to TTL Converter
Previous | 3 / 8 | Next |
The AN-USB-TTL module is a cost-effective way to convert TTL signal a USB interface. When connected to a PC USB port the AN-USB-TTL module is automatically detected and is installed as a native COM port which is compatible with any existing serial communication application. When using USB hubs thus allowing a hassle free configuration of a multi serial system without any IRQ or DMA configuration. They have 600W protect between the USB port and TTL protects the PC from spikes or possible misconnections in the communication bus.
Features
- Computer interface: USB V1.1 2.0 Plug and Play.
- Operational system virtual serial port driver.
- Supports Windows 98/ME/XP/2000/CE, MAC & Linux 2.4.20 or superior.
- Field Interfaces: TTL logic
- Transmission rate: from 300 bps to 1Mbps.
- Maximum TTL cable length : 15 m
- Power: from the USB port.
- Consumption: <100 mA.
- logic protection: 600W.
- USB connection: Mini-B connector. 120mm cable with the module.
- TTL logic connector: DB 9 Male type accepting
- ABS enclosure: 55 x 35 x 15 mm(not include cable)
- Operating environment: 0 to 70°C, 10 to 90% relative humidity, non-condensing.
Wiring Configuration
The TTL logic termination of the Interface is implemented as DB9 male connector. The pin assignments for the connector can be found in the following table as well as on a sticker applied to the unit.
TTL logic Pinout at DB9 Male
PIN# | TTL |
1 | TXD |
2 | RXD |
5 | GND |
Wiring examples
Description
The AN-USB-TTL module is a cost-effective way to convert
TTL signal a USB interface. When connected to a PC USB port the AN-USB-TTL module is automatically detected and is installed as a native COM port which is compatible with any existing serial communication application. When using USB hubs thus allowing a hassle free configuration of a multi serial system without any IRQ or DMA configuration. They have 600W protect between the USB port and TTL protects the PC from spikes or possible misconnections in the communication bus.