Catacomm Corporation
Sdn Bhd

Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com

E1 to Ethernet 100BaseFX (fiber port) converter

Previous 29 / 46 Next

E1 to Ethernet 100BaseFX (fiber port) converter E1/T1 Interface Converter Series Interface Converters AD-Net
Quantity
Add Quotation


Description

AN-E1-ETH-FIB is a E1 G.703 to Ethernet 100BaseFX (fiber port) converter, a 10/100 BaseFX fiber port is available at all wavelenghts and fiber types, like Single/MultiMode/WDM and distances up to 120 km.

AN-E1-ETH-FIB converter provides easy conversion from ITU-T G.703 E1 channel to Ethernet interface, which in this case is fiber type. he E1 is transparent and in full rate, which can support the E1 unframed mode, including fractional E1 per request.

A pair of AN-E1-ETH-FIB offer a cost effective solution for using existing E1 leased lines for transparent Ethernet service, and in case Ethernet interface is FX type and connected to remote locations with fiber distance more than 100 km.

Local management of the AN-E1-ETH-FIB Converter is provided via DIP switches. Front panel LEDs monitor the G.703 link, Ethernet LAN and serial ports for status and Loss of Sync. AN-E1-ETH-FIB compact G.703 Access Converter provides E1/2.048 Mbps Network Termination as well as serial or Ethernet LAN interface conversion in a standalone or rack mount package. AN-E1-ETH-FIB terminates the G.703 Telco interface and converts the data for transmission to a user-oriented fiber interface.

At fiber port, ethernet interface port, 1310 nm or 1550 nm technology can be used, or at specific cases we can offer also more exotic wavelenghts as 1610 nm, 1490 nm or any other.
 

Features

  • Based on self -Copyright IC.

  • Semi/full duplex self adapt, support VLAN.

  • Provide 2 clock types: E1 master clock, E1 line clock.

  • provide 3 loop functions: local loop, to remote loop, order remote loop.

  • Have pseudo random code test function, easy the installation and maintenance.

  • Support 2 impedances: 75 Ohm unbalance and 120 Ohm balance.

  • Have Ethernet monitor self-reset function, equipment will not dead.

  • Provide detecting realtime Ethernet communication status.

  • Compliant with IEEE 802.3 100Base-FX Standards at fiber port;

  • LED Indicators: POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL.

  • Single mode / Multimode or WDM single strand fiber.



Specification

E1 interface parameter:

  • Channel capacity: 1 Channels

  • Bit Rate: 2.048 Mb/s ±50 ppm

  • Line Code: HDB3

  • Line Impedance: 120 Ohm / 75 Ohm

  • Connector: RJ-45 or BNC

  • Pulse Shape: ITU-T G.703.

  • Jitter Performance: ITU-T G.823

  • clock: inter-clock, line-clock

Fiber Ethernet interface parameters:

Multi-mode: 1310nm; Single-mode: 1310nm

Fiber cable(m):
8.3/125, 8.7/125, 9/125 or 10/125 single-mode

Maximum distance: Multimode;2km(Default), Single-mode;20km/(Default)40km/60km/80km/100km/120km

    • MAC address capability: 4096

 

Power:

      • DC: -48V (-36 to -72V); +24 V (Optional)

      • AC: 90 to 260 VAC ; 47 ~ 63Hz

      • Power Interface: DC power terminal/AC socket

      • Power Consumption: 8 W maximum

Working environment:

    • Operating temperature: 0 to 50 °C

    • Storage temperature: -20; to +70 °C

    • Relative humidity: 5% to 90% (25 °C no condense)


Application scenarios:



Ordering Information

AN-E1-ETH-FIB-1

E1 G.703 to Ethernet 10/100 Base-FX Converter 2Km SC Connector (Multimode)

 
AN-E1-ETH-FIB-2

E1 G.703 to Ethernet 10/100 Base-FX Converter 2Km ST Connector (Multimode)

 
AN-E1-ETH-FIB/SM20

E1 G.703 to Ethernet 10/100 Base-FX Converter 20Km SC/FC/ST Connector (Single Mode Dual fiber)

 
AN-E1-ETH-FIB/SM40

E1 G.703 to Ethernet 10/100 Base-FX Converter 40Km SC/FC/ST Connector (Single Mode Dual fiber)

 
AN-E1-ETH-FIB/SM60

E1 G.703 to Ethernet 10/100 Base-FX Converter 60Km SC/FC/ST Connector (Single Mode Dual fiber)

 
AN-E1-ETH-FIB/SM80

E1 G.703 to Ethernet 10/100 Base-FX Converter 80Km SC/FC/ST Connector (Single Mode Dual fiber)

 
AN-E1-ETH-FIB/SM100

E1 G.703 to Ethernet 10/100 Base-FX Converter 100Km SC/FC/ST Connector (Single Mode Dual fiber)

 
AN-E1-ETH-FIB/SM120

E1 G.703 to Ethernet 10/100 Base-FX Converter 120Km SC/FC/ST Connector (Single Mode Dual fiber)

 
AN-E1-ETH-FIB/WDM20

E1 G.703 to Ethernet 10/100 Base-FX Converter 20Km SC/FC/ST Connector (Single Mode Single fiber, WDM)

 
AN-E1-ETH-FIB/WDM40

E1 G.703 to Ethernet 10/100 Base-FX Converter 40Km SC/FC/ST Connector (Single Mode Single fiber, WDM)

 
AN-E1-ETH-FIB/WDM60

E1 G.703 to Ethernet 10/100 Base-FX Converter 60Km SC/FC/ST Connector (Single Mode Single fiber, WDM)



Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Subscribe Newsletter