- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
E1 time slot mux 30 FXS FXO over E1 converter
Previous | 27 / 46 | Next |
Description
AN-E1-MUXlite provides conversion between ITU-T G.703 standard E1 framed interface and up to 30 FXS/FXO standard POTS analogue telephone lines. AN-E1-MUXlite is the fundamental equipment for the digital communication system and it
has another name, i.e. PCM basic group equipment. The equipment is used to converge the
signals such as voice, data and image into a standard 2M interface via various interface boards,
and realize point-to-point transmission. V35, 2/4 E&M, RS-232, and Ethernet ports as options along with voice over same E1.
Features
- E1 G.703/G.704 to POTS FXS/FXO conversion;
- V35, 2/4 E&M, RS-232, and Ethernet ports as options along with voice.
- The voice interface supports caller ID display;
- Provides two clock types: E1 master clock, E1 line clock
-
Provides 2 kinds of loop-return function, namely E1 self-looping at local end,
ordered self-loop at remote end; - realize the automatically rate set of local device to remote device
- has the function of pseudo-random code testing, convenient for opening of the circuit,and can be used as an error code instrument;
- realizes long-distance monitoring of local device to the remote device based on self-copyright IC;
- E1 supports 75 Ohm unbalanced and 120Ohm balanced impedance at the same time;
- Provides 30 voice channels, support calling number indication, DDI and other features;
- Voice port supports O port and S port, O port connects switch and S port connects user’s phone;
Specification
E1 interface
Interface standard: Conforms to G.703 standard
Interface rate: N×64Kbps, N:1¡«31
Code: HDB3
Interface impedance: 75A (unbalanced), 120A (balanced)
Connecter: BNC (75 A), RJ45 (120 A)
Vibration characteristic: Satisfies G.742 and G.823 standard
Clock type: internal-clock, line clock
FXS phone port
Ring voltage£º75V
Ring frequency£º25HZ
Two line input impedance£º600A(hanging off)
Wastage£º40 db
FXO switch port
Ring test voltage£º35V
Ring test frequency£º17HZ-60HZ
Two line input impedance£º600A(hanging-off)
Wastage£º40 db
V.35 interface
Interface type: V.35 synchronous
Velocity: N×64Kb/s (N =1~15)
Clock mode: DCE
Environmental
Operating temperature: -25 C~+70 C
Storage temperature: -40 C~+80 C
Relative temperature:95% (uncondensed)
Power supply
option I – DC-48V,range DC-36V~DC-72C
option II – AC220V,range AC165V~AC265V
Dimensions:
483£¨L£©×140£¨W£©×50£¨H£©mm
Ordering Information
AN-E1-MUXlite |
Basic configuration: PCB panel+1*E1(support BNC 75ohm and RJ45 120ohm),DC-48V built-in |
FXO |
1 additional FXO channel |
FXS |
1 additional FXS channel |
Ethernet |
Ethernet channel |
RS-232 |
RS-232 channel |
V35 |
V.35 channel |
Additional Information
E1 ports |
1 |
---|---|
Voice Ports (Telephone) |
30 |