- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Tainet
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.comIndustrial DIN Rain CAN BUS Over Fiber Optical Extender / Modem / Multiplexer
Previous | 2 / 10 | Next |
Description
The CAN fiber modem can transfer CAN bus signal to optical signal and transmit over fiber, which can extend the communication distance of CAN bus. At the same time, due to adopting optical fiber communication, it solves the problems of electromagnetic interference, ground ring interference and lightning damage, and greatly improves the reliability, security and confidentiality of data communications and can be widely used in various industrial control, process control and traffic control applications. It is particularly suitable for banks, power and departments or systems that have special requirements for electromagnetic interference.
Features
- Based on proprietary integrated circuit
- Provide 1~2 CAN bus interface, an optical port
- CAN transparent data transmission, without any set
- CAN interface Maximum number of nodes 128,CAN interface rate 0-1Mbps
- CAN interface speed in line with international CAN1.0, CAN2.0 standard
- DC9-55V or AC7-50V wide supply that includes an automatic polarity detection function, no need to distinguish positive and negative installation
- Provide DIN 35mm rail mounting, or wall mounting
- CAN interface with lightning protection, lightning reached GB / T17626.5 (IEC61000-4-5)Short circuit current wave 8 / 20μs, open standard peak output voltage 6KV
Specification
-
Fiber
- Optical port£º1
- Optical Fiber£ºSingle/Dual fiber
- Fiber interface£ºFC/SC/ST
- Wavelength£º850nm/1310nm Multimode£»1310nm/1550nm Single mode
- Receive sensitivity range£º-28dBm~- 40dBm
-
Can bus interface
- Standard
- Protocol: In line with international CAN1.0, CAN2.0 standard
- Rate: 0¡«1000Kbps
- Physical Interface: Industrial Terminals
- CAN Definitions: CANH, CANL, GND
-
Electrical and mechanical feature
- Relay-free transmission distance£º20~120Km
- Typical transmit power£º
- Single mode 1310/1550nm£º≥-9dBm
- Multimode 850nm£º-18dBm
- Multimode 1310nm£º-25dBm
- System power£ºAC7V ¡«50V£»DC 9V~ 55V
- Power consumption£º≤2W
- Size: (L × W × H) 72×125×26mm DIN Rail type
-
Working environment
- Operating temperature£º-40¡æ—+85¡æ
- Storage temperature£º-40¡æ—+85¡æ
- Working humidity£º0%—95% (No condensation£©
- MTBF£º>100,000 hour
Product Function Description | Simultaneous transmission of 1-2 CAN bus data over fiber |
Business Port Description | 1 fiber interface; 1~2 CAN bus interfaces |
Power Supply | AC 7~50V DC9~55V |
Product Size | (L × W × H) 72 * 125 * 26 mm DIN Rail Type |
Weight | 0.25Kg / PCS |
Ordering Information
AN-FM-CANBUS-DIN1-2 CAN BUS over fiber modem, industrial din rail type, Single & Multimode versions, AC7V ¡«50V£»DC 9V~ 55V